Handle Grommet 7BG004

$27.99

Genuine OEM grommet (part# 7BG004) for Tornado and Powr-Flite commercial high-speed burnishers — the rubber grommet that protects the wiring where it passes through the handle assembly on Tornado Brute Force burnishers (see full list below).

The 7BG004 is the grommet used in the handle group of the Brute Force burnishers. It appears on the Brute Force 1600 (98458B) main assembly drawing, and on the Brute Force 2000 (98482B) and the earlier 29 December 2022 Brute Force 2000 Dust Control (98486) drawings it is listed inside the complete handle assembly (X8911-K) — which tells you it is supplied as a component of that handle group rather than as a separate sub-assembly of its own.

A grommet looks like a trivial part and is not. Its job is to line the sheet-metal or moulded opening the wiring passes through so the edge of that opening cannot cut into the insulation. On a burnisher, the handle flexes every time the operator tilts the machine onto its wheels and every time the handle is adjusted, so the cable inside the grommet is worked back and forth thousands of times a day. Remove the grommet and that movement happens against a bare edge.

Replace the 7BG004 if it is cracked, hardened, flattened, split along one side, or missing entirely, and replace it as a matter of course any time you pull the wiring out of the handle for a switch or cord repair. The warning sign to look for is chafed or shiny insulation on the cable where it passes through — if you can see the braid or a flat spot on the jacket, the grommet has already failed and the cable itself needs inspecting too. A nicked conductor inside a handle is a shock and short-circuit risk, not a cosmetic issue.

The same grommet is used across the Brute Force burnisher handle group. The current 14 July 2025 Brute Force 2000 Dust Control (98486) main body drawing does not include the complete handle assembly group, so if you are working from that drawing and need a grommet, check the earlier 98486 drawing on the same page, or call 763-535-0770 with your model and serial number and we will confirm which handle group your machine has. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.

Compatible Models

  • Tornado models:
  • Powr-Flite models:
    • C202
    • NM1600
    • NM171HD
    • NM171SD
    • NM2000
    • NM2000DC
    • NM201HD
    • NM202

Frequently asked questions

What does the grommet (part# 7BG004) do on a Brute Force burnisher?

It lines the opening in the handle that the wiring passes through, so the edge of the opening cannot chafe or cut the cable insulation as the handle flexes in use.

How do I know if my 7BG004 grommet needs replacing?

Replace it if it is cracked, hardened, split or missing, or if the cable passing through it shows chafed, shiny or flattened insulation. Fit a new one whenever you remove the wiring from the handle.

Is the 7BG004 grommet part of the complete handle assembly?

Yes — shown on the 98482B and the 29 December 2022 98486 drawings it is listed under the complete handle assembly (X8911-K), and it is also available on its own as shown here.

What models is the grommet (part# 7BG004) compatible with?

The Tornado Brute Force 1600 (98458B), the Brute Force 2000 High-Speed Glazer (98482B) and the Brute Force 2000 Dust Control (98486) as covered by its 29 December 2022 main assembly drawing.

How do I order the grommet (part# 7BG004) or get help?

You can add the grommet (part# 7BG004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Handle Grommet 7BG004”

Your email address will not be published. Required fields are marked *