Powr-Flite Upholstery Cleaning Kit — PFX900S-KNS

Powr-Flite PFX900S-KNS Upholstery Cleaning Kit

The Powr-Flite PFX900S-KNS Upholstery Cleaning Kit connects to your existing Powr-Flite extractor and delivers the same 100 PSI solution pressure and vacuum recovery to an upholstery tool sized for furniture, stairs, and automotive fabric. The 10-foot hose gives the operator full working reach across a hotel room, office, or vehicle interior without moving the machine. The upholstery tool applies solution and recovers it at the contact point — a controlled spray-and-extract cycle that cleans without saturating fabric or foam. Everything stores in the included carry bag, organized and ready to deploy between jobs. Compatible with the Powr-Flite PFX900S (Prowler) and all Powr-Flite 100 PSI extractors. Also compatible with the Tornado Marathon SE 900 (98170), which shares the same machine platform and 100 PSI pump specification.

Twin City Vacuum in Crystal, Minneapolis, MN is an authorized Powr-Flite dealer. Questions? Call us at 763-535-0770. Free shipping on orders over $30 to all 50 states.

Kit Contents

Key Features

10 ft. Vacuum Hose — Full Working Reach

The 10-foot 1½-inch hose connects to the extractor’s ports and carries solution delivery and vacuum recovery to the upholstery tool. Ten feet provides reach across an average hotel room, vehicle interior, or office without repositioning the machine — a full sofa, a set of chairs, or several stair runs from a single machine placement. The hose length is sized for real-world upholstery cleaning programs where moving the extractor between every piece of furniture slows productivity significantly.

Upholstery Detail Tool — Controlled Extraction on Fabric

The precision detail tool applies solution and recovers it at the same contact point — solution sprays at the tool head and the vacuum slot immediately pulls recovered moisture back through the hose to the extractor’s recovery tank. This spray-and-extract cycle cleans without flooding upholstery fabric or saturating foam cushioning underneath. Over-wetting is the primary cause of upholstery damage during extraction cleaning — fabric distortion, foam shrinkage, and extended drying times all result from excessive moisture. The tool’s contact width and vacuum geometry are designed to apply the minimum solution needed for effective cleaning and recover it immediately, leaving fabric damp rather than wet.

Quick Disconnect — Seconds to Set Up

The PX5 quick disconnect connects the hose to the extractor port without tools — push to connect, pull to release. Switching from carpet extraction to upholstery cleaning mid-job takes seconds. For operators who move between carpet and furniture within the same cleaning pass, the quick disconnect removes the setup friction that would otherwise break work rhythm.

Carry Bag — Organized Storage and Transport

The carry bag keeps the hose, tool, and disconnect organized as a single unit between uses and between job sites. The hose coils into the bag, the tool stores alongside it, and the whole kit travels compactly. For vehicle-based cleaning operations where tools and accessories share cargo space with the extractor, having the kit contained in a bag rather than loose components makes loading and unloading faster and prevents loss of individual parts between jobs.

Compatible with Any Powr-Flite 100 PSI Extractor

The PFX900S-KNS works with any Powr-Flite extractor running at 100 PSI — not just the PFX900S. If your operation runs multiple Powr-Flite machines, one kit serves the full fleet. It is also compatible with the Tornado Marathon SE 900 (98170), which is built on the same platform with the same 100 PSI pump specification. Not sure if your machine is compatible? Call us at 763-535-0770 before ordering.

What Can You Clean with This Kit?

• Office furniture — task chairs, reception seating, conference room chairs, sofas and fabric accent furniture in lobbies and executive offices
• Hotel guest rooms — upholstered headboards, desk chairs, ottomans, fabric accent chairs; extraction removes body oil, food stains, and beverage spills from hotel upholstery between deep cleans
• Automotive interiors — fabric car and van seats, cloth headliners, door panel fabric; the 10-foot hose reaches all interior surfaces from outside the vehicle door
• Stairs — carpeted stair treads and risers; position the extractor on the landing and use the hose length to clean multiple stair runs without moving the machine
• Fabric-covered partitions and walls — office cubicle panels, fabric acoustic wall treatments; the tool extracts without saturating panel material
• Spot and stain treatment — targeted extraction on specific stained areas of carpet or upholstery; the tool applies solution and recovers it precisely at the stain location without wetting surrounding fabric

Compatible Extractors

• Powr-Flite PFX900S (Prowler) — primary designed machine
• All Powr-Flite 100 PSI extractors
• Tornado Marathon SE 900 — 98170 — same platform, 100 PSI pump

Technical Specifications — PFX900S-KNS

Frequently Asked Questions — Powr-Flite PFX900S-KNS

Does this kit work with the Tornado Marathon SE 900?

Yes. The Tornado Marathon SE 900 (98170) is built on the same platform as the Powr-Flite PFX900S with an identical 100 PSI solution pump. The PFX900S-KNS connects and operates the same way on the Marathon SE 900 as it does on the PFX900S.

What is included in the kit?

10 ft. vacuum hose (1½″, Part #1501WDS), upholstery detail tool (Part #AA163.1), quick disconnect (Part #PX5), and carry bag.

Does this kit work with Powr-Flite extractors other than the PFX900S?

Yes — compatible with any Powr-Flite extractor operating at 100 PSI. Call us at 763-535-0770 to confirm compatibility with your specific model before ordering.

Can this kit be used on automotive interiors?

Yes — the upholstery tool is sized for fabric car seats, cloth headliners, door panel fabric, and floor mat extraction. The 10-foot hose reaches all seat surfaces from outside the vehicle door without repositioning the extractor inside the vehicle.

Will this kit over-wet upholstery?

The tool is designed for controlled extraction — it applies solution and recovers it at the same contact point, leaving fabric damp rather than wet. Use the extractor’s solution flow control to reduce solution delivery on delicate fabrics and increase drying speed.

Is Twin City Vacuum an authorized Powr-Flite dealer?

Yes. Twin City Vacuum in Crystal, Minneapolis, MN is an authorized Powr-Flite dealer. Call us at 763-535-0770.

Buy the Powr-Flite PFX900S-KNS from Twin City Vacuum

• ✔ Genuine Powr-Flite OEM kit — authorized dealer
• ✔ 10 ft. vacuum hose, upholstery tool, quick disconnect, carry bag — complete kit
• ✔ Compatible with Powr-Flite PFX900S and all 100 PSI Powr-Flite extractors
• ✔ Compatible with Tornado Marathon SE 900 (98170)
• ✔ Furniture, stairs, automotive interiors, fabric partitions, spot treatment
• ✔ USA manufactured
• ✔ Free shipping on orders over $30 to all 50 states

$378.99 — Questions before you order? Call 763-535-0770, email twincityvacuum@gmail.com, or send us a message.

Compatible extractor: Tornado Marathon SE 900 →

Browse all carpet extractors: Shop all carpet extractors →