Tornado Burnisher Housing X8050AP
$372.99
Genuine OEM burnisher housing (part# X8050AP) — the cast body that carries the motor, pad drive, wheels and handle on 20 in. high-speed burnishers. Fits the Tornado Brute Force 1600 (98458B) and 2000 (98482B) and Powr-Flite M1600/M2000 (see full list below).
The X8050AP is the main housing on the Brute Force 1600 (98458B) and the Brute Force 2000 High-Speed Glazer (98482B) — on their respective main assembly drawings. It is catalogued for the Powr-Flite M1600 and M2000 burnishers as well, which makes it a cross-brand part rather than a Tornado-only one. The Brute Force 2000 Dust Control (98486) uses a different housing (X1455) because of its shroud and filter system.
This is the part everything else bolts to. The motor mounts to it, the belt and pulley drive runs inside it, the transport axle and wheels are carried by it, and the handle brace and pivot shaft locate on it. Alignment between the motor pulley and the main pulley is set by the housing, which is why a damaged housing shows up as repeat belt and bearing failures rather than as an obvious break.
Replace the X8050AP when the casting is cracked, when a motor or handle mounting boss has broken away, when the axle bores have worn oval so the wheels no longer sit square, or when impact damage has twisted the body enough that the pad no longer sits flat on the floor. The diagnostic signs are fasteners that will not hold torque anywhere near the damage, a pad that wears unevenly from one side to the other, and belts that keep failing after an otherwise correct repair.
This is a major part and a major job, so confirm the diagnosis first: uneven pad wear is far more often a bent pad driver (X8862), a worn main pulley (X8096) or a failed rubber ball bearing (X8098) than a bad housing. Call 763-535-0770 with your model and serial number before you commit — we would rather talk you through the cheaper checks first.
Compatible Models
- Tornado models:
- Brute Force 1600 — 98458B
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
Frequently asked questions
What does the burnisher housing (part# X8050AP) do?
It is the main body of the machine. The motor, belt and pulley drive, transport axle, wheels and handle all mount to it, and it sets the alignment between the motor and main pulleys.
How do I know if my X8050AP housing needs replacing?
Look for cracks, a broken-off mounting boss, oval axle bores, or a body twisted by impact. Supporting signs are fasteners that will not hold torque, uneven pad wear side to side, and repeated belt failures after a correct repair.
My pad wears unevenly — do I need a new housing?
Usually not. Check the pad driver (X8862), the main pulley (X8096) and the rubber ball bearing (X8098) first. A housing is the last suspect, normally only after impact damage.
What models is the burnisher housing (part# X8050AP) compatible with?
The Tornado Brute Force 1600 (98458B) and Brute Force 2000 High-Speed Glazer (98482B), and Powr-Flite M1600 and M2000 burnishers. The Tornado 98486 dust-control glazer uses a different housing (X1455).
How do I order the burnisher housing (part# X8050AP) or get help?
You can add the housing (part# X8050AP) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet