Bushing X1429

The Bushing (part# X1429) is a genuine Tacony OEM bushing from the brush roll assembly of the Tornado CK 3030 wide-area vacuum (Model 93030), shown as item 1.9 on the brush roll diagram. It is also used on the, which shares this machine’s brush roll platform. Fits Tornado 93030, Tornado 93031, CleanMax CM-WAV and Powr-Flite PF2030.

A bushing is a plain bearing surface: a sleeve that sits between a rotating shaft and its housing so the two never run metal-on-metal. In the brush roll it takes the side load the belt puts on the roll and lets the assembly spin freely while holding the shaft concentric. Unlike a ball bearing it has no rolling elements, so it wears gradually and quietly rather than failing suddenly — which is exactly why it is easy to overlook until the roll has developed noticeable play.

Check it whenever the brush roll is out. Signs of a worn bushing are lateral play at the brush end, a roll that no longer sits parallel to the floor, a squeal or chirp that changes with brush load, and visible ovalling or scoring of the bore. Because a worn bushing lets the roll shift under belt tension, leaving it in place accelerates wear on the belt, the pulley and the bearing block around it — replacing a two-dollar bushing is far cheaper than replacing what it damages.

Compatible Models for the Bushing X1429

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — all series D through J
• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
• CleanMax CM-WAV Wide Area Vacuum
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

Many Tacony fasteners are shared more widely across the Tornado, CleanMax, Riccar, Simplicity and Powr-Flite ranges; if your machine is not listed, call 763-535-0770 and we will confirm before you order.

Twin City Vacuum has been selling and servicing Tacony equipment since 1956 and stocks the genuine X1429 part rather than a hardware-store substitute. Browse the full Tornado 93030 main assembly parts, or read more on the Tornado manufacturer site.

Frequently Asked Questions

What does the Bushing (part# X1429) do on the Tornado 93030?

It is the plain bearing sleeve at item 1.9 of the brush roll assembly. It keeps the brush roll shaft running concentrically in its housing, absorbing the side load from the belt so the shaft and housing never contact each other directly.

How is a bushing different from the brush bearing?

A bushing is a plain sleeve with no moving parts; the brush bearing (part# 19809) is a rolling-element bearing. They do related jobs at different points in the assembly and are not interchangeable. Note that 19809 has been discontinued by Tacony — call us if you need it.

How do I know if my Bushing (part# X1429) needs replacing?

Grip the brush roll and try to move it sideways and up and down — noticeable play points at the bushing. Also look for an ovalled or scored bore, a roll that does not sit parallel to the floor, and a squeal that changes as the brush loads up. Replace it whenever the roll is out for a belt or bearing change.

How do I order the Bushing (part# X1429) or get help?

You can add the Bushing (part# X1429) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.