Tornado Cable Conduit 10″ 19878

The Cable Conduit 10″ (part# 19878) is a genuine Tornado OEM replacement part fitted across 4 Tornado wide-area upright models — see the full compatibility list below. It sleeves and protects the cable run along the machine.

On this machine the cable conduit 10″ is part of the assembly shown on the model’s parts diagrams. One per machine; a ten inch length on the left side.

When to replace it. Replace the cable conduit 10″ when the conduit is split, crushed or has pulled out of its fittings, exposing the cable. Fitting a worn part back during a service is usually a false economy on a machine in daily commercial use, because the failure tends to return quickly and can take neighbouring components with it.

Fitting notes. One per machine; a ten inch length on the left side. Always match electrical parts to your machine’s voltage, and check the serial plate before ordering parts for the later production build. If you are not certain which part you need, give us the callout number from the relevant diagram and we will confirm it against your serial number before you order.

Compatible Models for the Cable Conduit 10″

• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956. You can browse the full machine on the Tornado 93031 Carpetkeeper parts page, see every model we stock parts for on our Tornado cleaning equipment parts page, and read the manufacturer’s own product information at tornadovac.com.

Frequently Asked Questions

What does the Cable Conduit 10″ do on the Tornado 93031 Carpetkeeper?

The cable conduit 10″ sleeves and protects the cable run along the machine.

How do I know if my Cable Conduit 10″ needs replacing?

Replace it when the conduit is split, crushed or has pulled out of its fittings, exposing the cable.

What models is the Cable Conduit 10″ (part# 19878) compatible with?

It fits 4 Tornado wide-area upright models: 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F.

How do I order the Cable Conduit 10″ (part# 19878) or get help?

You can add the Cable Conduit 10″ (part# 19878) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing commercial floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.