Cap 62030007
$1.99
Genuine OEM cap (part# 62030007) for Tornado floor scrubbers. It closes an unused port or protects a fitting in the water valve assembly.
Genuine OEM cap (part# 62030007) for Tornado floor scrubbers — compatible machines are listed below. In the water valve assembly it closes a port or protects a fitting.
Caps in a fluid circuit are not decoration. A port left open in a pressurised line leaks, obviously; a port left open in a low-pressure line is worse in a subtler way, because it lets air into the circuit. Air in a solution line gives flow that varies from run to run and refuses to respond predictably to the control — which is the kind of fault that sends people through the pump, the valve and the filter before anyone notices a missing cap.
The other job is keeping dirt out. Anything that gets into the solution circuit ends up at the filter screen, the valve seat or the small outlets that wet the brushes, and an open port on a machine that is hosed down at the end of every shift is an open invitation.
Caps are small, cheap, and lost constantly — they come off during a service and roll under the machine, or they are left off because a job was finished in a hurry. Keeping a few on the van costs almost nothing and saves a diagnosis.
Replace a cap that is cracked, that has distorted or stripped threads or lugs, or whose sealing face is scored so it no longer seats. If the cap needs forcing, check the fitting it screws onto before blaming the cap — forcing a misaligned cap cross-threads it and makes the problem permanent.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the cap (part# 62030007) do?
It closes a port or protects a fitting in the water valve assembly, keeping the circuit sealed and keeping dirt out.
Does a missing cap really matter on a low-pressure line?
Yes, and in an awkward way. It lets air into the solution circuit, which gives flow that varies run to run and will not respond predictably to the control — a fault people chase through the pump, valve and filter first.
When should a cap be replaced?
When it is cracked, its threads or lugs are distorted or stripped, or its sealing face is scored so it no longer seats. If it needs forcing, check the fitting it screws onto first — forcing a misaligned cap cross-threads it permanently.
How do I order the Cap (part# 62030007) or get help?
You can add the Cap (part# 62030007) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the cap (part# 62030007) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet