Cap 62350008
$7.99
Genuine OEM cap (part# 62350008) for Tornado floor scrubbers. It closes the inspection opening on the solution tank.
Genuine OEM cap (part# 62350008) for Tornado floor scrubbers — compatible machines are listed below. On the solution tank assembly it closes the inspection opening, working with its own gasket to seal the joint. Several caps appear on this drawing under different part numbers; they are not interchangeable, so order by number.
An inspection cap earns its keep at two moments. Day to day it keeps the tank closed, which keeps debris out of the clean water — and everything that gets into a solution tank ends up blocking the filter screen, the valve seat or the brush outlets. At service it comes off so the tank can be cleaned out properly, which is the only way to deal with the sediment and detergent residue that settle in any tank over months.
Because it is opened deliberately and often, it wears in predictable ways. Threads or lugs strip or distort, usually from being forced when they were not aligned; the body cracks, often from being dropped on a concrete floor; and the sealing face gets scored or deformed so the gasket no longer has a flat surface to seal against.
A cap that will not pull down evenly is worth attention rather than extra force. Check the mating thread or lugs on the tank as well as on the cap, and clean scale off both before deciding the cap has failed.
Fit a new gasket whenever the cap is removed; a gasket that has been compressed for months will not seal reliably a second time, and the cost of discovering that is a tank weeping on the next full fill.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado TS350-W20-U — 99694
- Tornado BD 26/14 — 99720
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 13 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the cap (part# 62350008) do?
It closes the inspection opening on the solution tank, sealing with its own gasket. The opening is there so the tank can be cleaned out properly at service.
Is this the same as the other solution tank caps?
No. Several caps appear on this drawing under different part numbers and they are not interchangeable — order by number rather than by appearance.
The cap will not pull down evenly. What should I check?
The threads or lugs on both the cap and the tank, and scale on the sealing faces. Forcing it is what strips and distorts them. Fit a new gasket whenever the cap comes off — a gasket compressed for months will not seal reliably again.
How do I order the Cap (part# 62350008) or get help?
You can add the Cap (part# 62350008) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the cap (part# 62350008) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet