Caster, 4 in. Swivel X9240

$23.99

Genuine OEM 4 in. swivel caster (part# X9240) with a 15/16 in. stem — one of four fitted to the base of a downdraft air mover — fits Tornado Windshear and Powr-Flite models (see full compatibility list below).

Genuine OEM 4 in. swivel caster (part# X9240) — one of the four stem-mounted swivel casters that carry a downdraft air mover. It is a shared service part used on both Tornado Windshear and Powr-Flite machines (see the full compatibility list below).

What the X9240 caster does

A downdraft air mover is not carried between rooms, it is pushed. The four casters are what make that possible, and they do two jobs at once. The obvious one is mobility: a 4 in. wheel on a swivelling fork rolls over thresholds and cable runs and lets the machine be spun on the spot in a corridor. The less obvious one is ride height — the casters hold the shell a set distance off the floor, and on a downdraft machine that gap is the intake. A machine sitting low on a collapsed caster draws unevenly.

The stem presses into a caster receiver moulded into the base of the housing, so a caster can be changed without dismantling anything else. Four are fitted per machine, and they are worth replacing as a set once the first one goes, because a mixed set of worn and new casters leaves the machine rocking.

When to replace it

Look at the wheel and the swivel. A tread that is flat-spotted from being parked under load, split rubber, a wheel that will not spin freely, or a swivel that has seized or gone loose in its raceway are all end-of-life. Check the stem for bending and for play in the receiver; a loose stem will wear the receiver as well, and then two parts need replacing instead of one. Grit packed into the bearing can sometimes be cleaned out, but a caster that has been run flat is not recoverable.

Specifications

  • Part number: X9240
  • Description: swivel caster
  • Wheel diameter: 4 in.
  • Stem: 15/16 in.
  • Quantity fitted: 4 per machine
  • UPC: 098612124245

A note on the part name: the dealer catalog currently lists X9240 simply as “Wheels”, which is also the name it carries for the caster receiver X9195 — a different part at a different price. The factory parts drawing and the Powr-Flite catalog both call X9240 a 4 in. swivel caster, which is what it is, so that is the name used here.

Compatible Models

The factory fitment record places part# X9240 on the Tornado Windshear 98784 downdraft air mover and on the Powr-Flite PDF6WRD air mover. It is also listed on the Windshear 98785, the 230V export build of the Downdraft, which is not sold in the United States. Four are fitted to each machine.

  • Tornado Windshear 98784 (downdraft air mover) — 4 fitted
  • Powr-Flite PDF6WRD air mover
  • Tornado Windshear 98785 — 230V export build, not sold in the US

Frequently Asked Questions

What does the 4 inch swivel caster (part# X9240) do on a Tornado Windshear 98784?

The swivel caster (part# X9240) is one of the four wheels the downdraft air mover rolls on. Its stem presses into a caster receiver moulded into the base of the housing, and the fork swivels so the machine can be turned and repositioned without lifting it. Four are fitted. On a downdraft machine the casters also set the ride height, which is what leaves the air gap under the shell for the fan to draw through — so they are part of how the machine moves air, not just how it moves.

How do I know if the 4 inch swivel caster (part# X9240) needs replacing?

Replace a caster when the wheel no longer rolls freely, when the swivel has gone stiff or sloppy, or when the tread is flat-spotted, split or worn down to the hub. A caster that drags will scuff a finished floor and make the machine fight you in a corridor. Check the stem too: a bent stem, or one that has worked loose in its receiver, will not hold the machine level, and a machine sitting low on one corner is not pulling air evenly.

What models is the 4 inch swivel caster (part# X9240) compatible with?

Part# X9240 is listed on the Tornado Windshear 98784 downdraft air mover and on the Powr-Flite PDF6WRD. It also appears on the Windshear 98785, the 230V export version of the Downdraft, which is not sold in the United States. The sidedraft Windshear 98782 uses a different caster and socket arrangement, so confirm your model before ordering.

How do I order the 4 inch swivel caster (part# X9240) or get help?

You can add the swivel caster (part# X9240) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Not sure whether you need the caster or the receiver it presses into? Browse the full Tornado Windshear air mover parts range, or call us at 763-535-0770.

Reviews

There are no reviews yet

Be the first to review “Caster, 4 in. Swivel X9240”

Your email address will not be published. Required fields are marked *