Connector 47592010

$6.99

Genuine OEM connector (part# 47592010) for Tornado floor scrubbers. It is the electrical connector that plugs onto the solution solenoid valve coil.

Genuine OEM connector (part# 47592010) for Tornado floor scrubbers — compatible machines are listed below. It is the electrical connector that mates with the solution solenoid valve coil.

Connectors are where electrical faults live on a wet machine. The coil itself is a sealed winding; the connector is a plug with exposed metal inside it, sitting low on the machine in solution spray and under a hose-down at the end of every shift. Moisture gets in, the terminals corrode, and the resistance of the joint creeps up until the coil no longer gets the voltage it needs to pull the plunger.

The symptoms are the awkward kind. A high-resistance connector gives a valve that works when the machine is cold and stops when it is warm, or works until the machine goes over a threshold, or works on the bench and not on the floor. People replace coils and valve bodies chasing this.

So test here first. With the valve commanded on, measure voltage at the connector, not at the controller — that single reading separates a wiring fault from a coil fault and costs nothing. Then look inside the connector: green or white deposits, a terminal that has lost its spring and no longer grips, a cracked body that lets water straight in, or a lead pulled part-way out of its crimp.

Replace the connector rather than cleaning corroded terminals repeatedly; once a terminal has lost its spring tension, cleaning restores the contact for a week. Make sure any seal or boot is seated properly when refitting.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the connector (part# 47592010) do?

It is the electrical connector that plugs onto the solution solenoid valve coil, carrying the supply the coil needs to lift its plunger.

My solution valve works intermittently. Where should I look first?

Here. With the valve commanded on, measure voltage at the connector rather than at the controller. A corroded, high-resistance connector gives exactly the awkward symptoms people chase through coils and valve bodies — works cold, stops warm, or drops out over a threshold.

Can I just clean the terminals?

Once, maybe. But once a terminal has lost its spring tension, cleaning restores contact for about a week. Replace the connector, and make sure any seal or boot is seated properly when refitting — this connector sits in solution spray and gets hosed every shift.

How do I order the Connector (part# 47592010) or get help?

You can add the Connector (part# 47592010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the connector (part# 47592010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Connector 47592010”

Your email address will not be published. Required fields are marked *