Connector Lever 63120001
$8.99
Genuine OEM connector lever (part# 63120001) for Tornado floor scrubbers. It is the handle fitted to a battery connector so it can be pulled apart safely.
Genuine OEM connector lever (part# 63120001) for Tornado floor scrubbers — compatible machines are listed below. It is the handle that fits to a high-current battery connector, giving a proper grip for separating and joining the two halves.
High-current connectors are deliberately stiff. The contacts have to grip hard to keep resistance low, and that means real force is needed to part them. The lever exists so that force goes into the housing in a straight line, which is both easier and much better for the connector.
Without it, people pull on the cables. That is the problem the lever prevents: pulling on a cable puts the load into the crimped joint behind the contact, which loosens it over time, and a loosened crimp is a resistive joint that heats under load — the same heat that melts housings and ruins contacts. The cables also get bent sharply at the connector, which fatigues conductors inside their insulation.
So a broken or missing lever is worth replacing promptly, not for convenience but because of what the machine suffers while it is missing.
Levers fail by cracking at the attachment point or at the pivot, usually from repeated hard pulls or from being used on a connector that is seized with corrosion. If a connector needs more force than it used to, the connector is the problem — check the contacts rather than fitting a stronger handle.
Replace a lever that is cracked anywhere; it will fail at the moment someone is leaning on it.
Compatible Models
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
This part is shared across 9 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the connector lever (part# 63120001) do?
It is the handle on a high-current battery connector, giving a straight-line grip for pulling the two halves apart and pushing them together.
Does it matter if the lever is missing?
Yes. Without it, people pull on the cables, which loads the crimped joint behind the contact and loosens it. A loosened crimp is a resistive joint that heats under load — the same heat that melts housings and ruins contacts.
My connector needs more force than it used to. Should I get a stronger handle?
No — check the connector. Increasing force usually means contacts that are corroded or deteriorating, and a stiffer pull just transfers the damage elsewhere. Levers themselves crack at the attachment or pivot, usually from repeated hard pulls on a seized connector.
How do I order the Connector Lever (part# 63120001) or get help?
You can add the Connector Lever (part# 63120001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the connector lever (part# 63120001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet