Cord Holder Assembly 39261

This is the cord holder assembly for the Tornado TV 2 SS dry canister and the Simplicity Brio. It is what the 40-foot power cord wraps onto for storage and transport, and one Tacony part number covers both machines.

What the Cord Holder Assembly Does

A 40-foot cord is most of what an operator handles on a canister vacuum, and how it is stored decides how long it lasts. A sound cord holder lets the cord be wound and released cleanly; a broken one means the cord gets dragged, kinked and stood on, and a damaged cord is both a much more expensive part and a genuine safety issue.

Where It Sits on the Machine

It is mounted on the body of the canister near the cord entry, shown on the TV 2 SS main assembly diagram alongside the power cord.

Compatible Models for the Cord Holder Assembly

• Tornado TV 2 SS Dry Canister Vacuum — Model 93282
• Simplicity Brio Canister Vacuum

This is one part shared by both machines, so you are ordering the same component whichever you own. Not sure which you have? Call us at 763-535-0770 and we will confirm it.

When to Replace It

Replace the holder when it has cracked, when a hook has broken off, or when it no longer holds a wound cord without it falling loose. It is worth doing promptly rather than working around: every shift with a broken cord holder is a shift the cord spends being damaged.

Fitting Notes

Inspect the cord itself while the holder is off, along its whole length and particularly at the strain relief where it enters the machine. A cord that has been dragged because the holder was broken often has damage that is easy to miss until it matters.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado TV 2 SS parts range, or see the TV 2 SS parts diagram. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

Why is there no price shown for this part?

Tacony does not publish a price for part number 39261 in the dealer catalogue we buy from, and we will not invent one. Call Twin City Vacuum at 763-535-0770 with the part number and we will quote it, confirm availability and check it against your machine before anything ships.

Is it worth replacing a broken cord holder?

Yes. The holder is a small part; the 40-foot power cord it protects is one of the more expensive items on the machine, and a cord that gets dragged and kinked because there is nowhere to wind it will need replacing far sooner.

How do I order the Cord Holder Assembly (part# 39261) or get help?

Order the Cord Holder Assembly right here on this page, or call Twin City Vacuum at 763-535-0770 and give us part number 39261. We have been a Tornado dealer since 1956 and can confirm the part against your machine before it ships. You can also visit the store at 5415 West Broadway, Crystal, MN 55428.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.