Tornado TV 2 SS Parts — Model 93282

Genuine Tornado parts for the Tornado TV 2 SS dry canister vacuum, Model 93282 — 32 parts covering the whole machine, from the tank and top covers down to the motor, the wheels and the full tool set. Twin City Vacuum has been selling and servicing Tornado equipment since 1956.

Find your part on the diagram, note the number beside it, and match that number to the first column of the table underneath. Every dotted part opens in a new tab. Can’t find your part? Call us at 763-535-0770.

Tornado TV 2 SS Main Assembly Parts

#ImagePart DescriptionPart NumberPrice
1Upper Top Cover Kit part number 39250 — photo coming soonUpper Top Cover Kit39250$19.99
2Lower Top Cover Kit part number 39251 — photo coming soonLower Top Cover Kit39251$6.99
3Clean Breeze Disposable Filter Bag 10-Pack part number 90025 — photo coming soonClean Breeze Disposable Filter Bag 10-Pack90025$41.99
4Tornado TV 2 SS Tank Assembly Kit schematic diagram part number 39252Tank Assembly Kit39252Call
5Hose Inlet Assembly Kit part number 39253 — photo coming soonHose Inlet Assembly Kit39253$1.99
6Handle Set with Screws part number 39254 — photo coming soonHandle Set with Screws39254$14.71
7Tornado TV 2 SS Pleated HEPA 12 Filter Kit part number 90036Pleated HEPA 12 Filter Kit90036$17.99
8Motor Chamber Seal part number 39256 — photo coming soonMotor Chamber Seal39256Call
9Motor Chamber part number 39257 — photo coming soonMotor Chamber39257Call
10Knob part number 39258 — photo coming soonKnob39258Call
11On/Off Switch Assembly Kit part number 39259 — photo coming soonOn/Off Switch Assembly Kit39259$12.99
12Power Cord 18/3 40 ft part number 39260 — photo coming soonPower Cord 18/3 40 ft39260$47.99
12APower Cord 230V part number 39273 — photo coming soonPower Cord 230V39273Call
13Cord Holder Assembly part number 39261 — photo coming soonCord Holder Assembly39261Call
14Control Board Assembly part number 39262 — photo coming soonControl Board Assembly39262$6.99
14AControl Board Assembly 230V part number 39274 — photo coming soonControl Board Assembly 230V39274Call
16Insulation, Upper part number 39264 — photo coming soonInsulation, Upper39264$1.99
17Motor Mount part number 39265 — photo coming soonMotor Mount39265$1.99
18Vacuum Motor 1200W part number 39266 — photo coming soonVacuum Motor 1200W39266$92.99
18AVacuum Motor 230V part number 39275 — photo coming soonVacuum Motor 230V39275Call
19Motor Cover Assembly Kit with Screw part number 39267 — photo coming soonMotor Cover Assembly Kit with Screw39267$7.99
20Insulation, Lower part number 39268 — photo coming soonInsulation, Lower39268$1.99
21Insulation Plate part number 39269 — photo coming soonInsulation Plate39269$1.99
22Wheel Kit part number 39270 — photo coming soonWheel Kit39270$18.99
23Caster Assembly part number 39271 — photo coming soonCaster Assembly39271$3.99
24Base Assembly with Screws schematic diagram part number 39272Base Assembly with Screws39272Call
252-Piece Straight Extension Wand part number 900272-Piece Straight Extension Wand90027$16.99
26Hose with Single Bend Handle and Suction Regulator part number 90028Hose with Single Bend Handle and Suction Regulator90028$12.99
27Multipurpose Carpet and Hard Floor Nozzle Tool part number 90029Multipurpose Carpet and Hard Floor Nozzle Tool90029$11.99
28Plastic Crevice Tool part number 90030Plastic Crevice Tool90030$4.99
29Dusting Brush Tool part number 90031Dusting Brush Tool90031$4.99
30Reusable Cloth Shake-Out Bag part number 90035 — photo coming soonReusable Cloth Shake-Out Bag90035$4.99

Five rows carry no dot. The extension wand, hose, floor tool, crevice tool and dusting brush are listed in the parts list as parts of this machine but are not drawn on the main assembly artwork, so there is no marker to click — the rows are here because the parts are real, and they link through in the usual way.

120-volt and 230-volt machines differ in three places. The power cord, the control board and the vacuum motor each have a separate part number for the 230-volt build, listed here as the A rows. Check the rating plate on your machine before ordering any of those three, or call us and read it to us.

Tornado TV 2 SS Accessories and Consumables

The drawing shows the two running consumables — the Clean Breeze disposable bag and the pleated HEPA filter — on their own sheet as well as on the main assembly. They are the same two part numbers in both places, so order once.

#ImagePart DescriptionPart NumberPrice
1Clean Breeze Disposable Filter Bag 10-Pack part number 90025 — photo coming soonClean Breeze Disposable Filter Bag 10-Pack90025$41.99
2Tornado TV 2 SS Pleated HEPA 12 Filter Kit part number 90036Pleated HEPA 12 Filter Kit90036$17.99

Tornado also publishes a wiring diagram for this machine. It carries no orderable part numbers, so there is no table for it — if you need the wiring layout for a repair, call us at 763-535-0770 and we will look it up with you.

Where a price is shown it is current. Parts marked Call have no published price in the dealer catalogue and we would rather quote you than invent a number. Browse the full Tornado TV 2 SS parts range, or see all Tornado vacuum parts. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

How do I find the right Tornado TV 2 SS part on this diagram?

Find the part on the diagram and note the number printed beside it, then match that number to the first column of the table below. Every numbered part that The drawing marks on the drawing carries a clickable red dot that opens the part in a new tab. If the number you are looking at is not in the table, call us at 763-535-0770 with your model number and we will identify it.

Do these parts also fit the Simplicity Brio?

Twenty of the thirty-two do. Tornado builds the Tornado TV 2 SS and the Simplicity Brio on the same platform and catalogues those twenty under a single part number for both machines — the motor, the control board, the motor chamber and its seal, the insulation, the caster, the base and the whole tool set. Those listings are titled without a brand because they are genuinely one part for two machines. The other twelve, including the upper top cover, the tank, the handle, the wheels and the bags, are specific to the TV 2 SS.

My machine is 230 volt. Are the parts the same?

Mostly, but not all. The TV 2 SS is built in a 120-volt and a 230-volt version, and three parts differ between them: the power cord, the control board and the vacuum motor. The 120-volt machine takes 39260, 39262 and 39266; the 230-volt machine takes 39273, 39274 and 39275. Read the rating plate on your machine before ordering any of those three.

Why do some rows show “Call” instead of a price?

There is no published a price for every part number in the dealer catalogue we buy from, and we will not invent one. Nine parts on this machine are in that position. Ring 763-535-0770 with the part number and we will quote it and confirm availability.

Which parts wear out first on a TV 2 SS?

The consumables: the Clean Breeze disposable bags and the pleated HEPA filter. After those, the hose and the floor tool take the most handling, and the wheels and caster are the mechanical parts most likely to need replacing. The motor is a long-life item — check the bag, the filter and the seals before suspecting it.

Do you stock Tornado TV 2 SS parts?

We stock Tornado parts at our Crystal store and have been a Tornado dealer since 1956. Order here, or call 763-535-0770 and we will confirm the part against your machine before it ships. You are also welcome to bring the machine in to 5415 West Broadway, Crystal, MN 55428.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.