Motor Cover Assembly Kit with Screw 39267

This is the motor cover assembly for the Tornado TV 2 SS dry canister and the Simplicity Brio, and Tacony supplies it as a kit with its screw included — which is worth knowing, because it means you are not hunting for a fastener when the part arrives.

What the Motor Cover Assembly Kit with Screw Does

The cover closes the motor chamber from below and completes the acoustic enclosure around the motor. It also protects the motor from anything that gets into the lower body of the canister in service, which on a machine dragged around a commercial floor all day is not a theoretical concern.

Where It Sits on the Machine

It closes the underside of the motor chamber, shown on the TV 2 SS main assembly diagram below the motor and above the lower insulation.

Compatible Models for the Motor Cover Assembly Kit with Screw

• Tornado TV 2 SS Dry Canister Vacuum — Model 93282
• Simplicity Brio Canister Vacuum

This is one part shared by both machines, so you are ordering the same component whichever you own. Not sure which you have? Call us at 763-535-0770 and we will confirm it.

When to Replace It

Replace the cover if it is cracked, if a mounting point has broken, or if it no longer pulls down evenly against the chamber. A cover that does not seat properly is an acoustic leak and lets debris at the motor, and cracks in this position usually start at a mounting boss and spread.

Fitting Notes

Use the screw supplied rather than an improvised substitute, and tighten it enough to seat the cover without distorting it — over-tightening a moulding at a single point is what cracks it. Check the insulation and the motor mount are correctly positioned before the cover goes on, because you will not see them afterwards.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado TV 2 SS parts range, or see the TV 2 SS parts diagram. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

Does the kit include the screw?

Yes. Tacony supplies part number 39267 as a motor cover assembly kit with its screw, so you have everything needed to refit it. Use the supplied screw rather than a substitute — the length is chosen for the boss it threads into.

What happens if I run the machine with the cover off?

We would not. The cover completes the acoustic enclosure, so the machine is markedly louder without it, and it is what keeps floor debris away from the motor. It is an inexpensive part relative to the motor it protects.

How do I order the Motor Cover Assembly Kit with Screw (part# 39267) or get help?

Order the Motor Cover Assembly Kit with Screw right here on this page, or call Twin City Vacuum at 763-535-0770 and give us part number 39267. We have been a Tornado dealer since 1956 and can confirm the part against your machine before it ships. You can also visit the store at 5415 West Broadway, Crystal, MN 55428.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.