Fuse 20A 62802002
$1.99
Genuine OEM 20 amp fuse (part# 62802002) for Tornado floor scrubbers. It protects a mid-current circuit such as an actuator or auxiliary supply.
Genuine OEM 20 amp fuse (part# 62802002) for Tornado floor scrubbers — the machines it fits are listed below. Twenty amps is the mid-range rating on this machine, used where a circuit does real work: actuators, auxiliary supplies, and similar loads.
At this level a blown fuse has two quite different explanations, and the timing tells you which. A fuse that fails the instant a function is switched on is reporting a short — a conductor touching the frame, a connector full of water, a motor with a shorted winding. A fuse that fails after a minute or two of operation is reporting an overload: the circuit is working, but whatever it drives is being made to work harder than it should.
That second case is the one worth understanding, because replacing the fuse simply repeats the failure. An actuator fighting a seized pivot or a bent linkage draws far more current than it does on a free mechanism, and a motor dragging on a worn bearing does the same. Free the mechanism and the fuse stops blowing.
Before fitting a replacement, also check the holder. Clips that have weakened or corroded make a resistive joint, and the heat from that ages the element so it blows below its rating — a fuse failing on a circuit with nothing wrong with it.
Fit 20 amps, not more. The rating is chosen for the cable and the component behind it, and going up a size leaves the cable as the weakest link.
Compatible Models
- Tornado 18″ BR 18/11 — 99685
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
This part is shared across 4 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the 20 amp fuse (part# 62802002) protect?
A mid-current circuit that does real work — an actuator, an auxiliary supply or a similar load.
How do I tell a short from an overload?
By timing. A fuse that fails the instant a function is switched on is reporting a short. One that fails after a minute or two of operation is reporting an overload — the circuit works, but something is making it work too hard.
My actuator keeps blowing this fuse. What should I check?
The mechanism. An actuator fighting a seized pivot or a bent linkage draws far more current than it does on a free mechanism, and a new fuse will simply blow again. Also check the fuse holder clips for corrosion, which heats the element and makes it fail below rating.
How do I order the Fuse 20A (part# 62802002) or get help?
You can add the Fuse 20A (part# 62802002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the fuse 20a (part# 62802002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet