Fuse 30A Maxi 62803001

$3.99

Genuine OEM 30 amp maxi fuse (part# 62803001) with faston terminals, for Tornado floor scrubbers. It protects one of the machine’s higher-current circuits.

Genuine OEM 30 amp maxi fuse (part# 62803001) with faston terminals, for Tornado floor scrubbers — compatible machines are listed below. The maxi format is physically larger than a standard blade fuse because it has to carry and interrupt more current, and it is not interchangeable with the smaller formats the machine also uses.

Thirty amps protects something substantial — a motor circuit or a major sub-system — so a failure here deserves investigation rather than a replacement fuse and a hopeful restart. The most common real cause is a load that has grown heavier: a motor whose brushes have worn and whose commutator is arcing, or one whose bearings are dragging, pulls progressively more current as it deteriorates. It may run for months blowing a fuse occasionally before it fails outright, and each new fuse buys a shorter interval than the last.

Connections are the other half. At 30 amps a loose or corroded terminal produces real heat on its own, and heat ages a fuse element until it opens below its rating. If the faston terminals or the holder are discoloured, or the fuse is blackened at its blades rather than parted cleanly in the middle, the connection is the fault and a new fuse will not last.

Measure the circuit’s running current if you can, and compare it to what the fuse is rated for; a circuit sitting close to its fuse rating in normal operation is a circuit about to become a service call.

Fit the correct rating and format — a standard blade fuse forced into a maxi holder will not make proper contact.

Compatible Models

  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 18 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the 30 amp maxi fuse (part# 62803001) protect?

A higher-current circuit such as a motor circuit or a major sub-system. The maxi format is physically larger than a blade fuse because it carries and interrupts more current.

It blows every few weeks. What is happening?

Usually a load that is deteriorating. A motor with worn brushes and an arcing commutator, or with dragging bearings, pulls progressively more current — and each new fuse lasts a shorter interval than the last until the motor fails outright.

Can I use a standard blade fuse instead?

No. A blade fuse forced into a maxi holder will not make proper contact, and poor contact heats the fuse so it blows below its rating. Fit the correct rating and the correct format.

How do I order the Fuse 30A Maxi (part# 62803001) or get help?

You can add the Fuse 30A Maxi (part# 62803001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the fuse 30a maxi (part# 62803001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Fuse 30A Maxi 62803001”

Your email address will not be published. Required fields are marked *