Gas Shock Absorber Support 61001001

$28.99

Genuine OEM gas shock absorber support (part# 61001001) for Tornado floor scrubbers. It is the bracket the gas strut anchors to on the solution tank assembly.

Genuine OEM gas shock absorber support (part# 61001001) for Tornado floor scrubbers — the machines it fits are listed below. It is the bracket that anchors the gas strut on the solution tank assembly.

A strut only works against a solid anchor, and this bracket is that anchor. It carries the full extension force of the strut continuously while the cover is up, and it takes a shock load every time the cover is dropped rather than lowered. Because the strut is a safety component — it is what stops a heavy cover coming down on somebody — the bracket is a safety component too, even though it is a simple piece of pressed metal.

Failures start at the pivot. The hole wears oval, which introduces slop so the strut has free play before it starts to push; that lets the cover drop a little before the strut catches it and accelerates the wear further. From there the bracket can crack at the pivot or at its own mounting points, or bend if the cover has been forced past its intended travel — a bent bracket changes the strut’s geometry and the strut then does not hold the cover at the height it should.

Inspect it whenever the strut is replaced, which is the natural moment: check the pivot hole for ovality, look for cracks radiating from it and from the bracket’s mounting holes, and sight along the bracket for a bend. Do not fit a new strut to a worn bracket; it will feel wrong immediately and the new strut will wear its own pivot quickly.

Compatible Models

This part is shared across 7 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the gas shock absorber support (part# 61001001) do?

It is the bracket that anchors the gas strut on the solution tank assembly, carrying the strut’s full extension force while the cover is up and taking a shock load whenever the cover is dropped.

The cover feels like it drops slightly before the strut catches it. Why?

That is play at the bracket’s pivot hole, which has worn oval. The strut has free movement before it starts to push, and the extra impact accelerates the wear.

Should I replace the bracket when I replace the strut?

Check it then, which is the natural moment. Look for an ovalled pivot hole, cracks radiating from the pivot or mounting holes, and a bend. Do not fit a new strut to a worn bracket — it will feel wrong immediately and the new strut will wear its pivot quickly.

How do I order the Gas Shock Absorber Support (part# 61001001) or get help?

You can add the Gas Shock Absorber Support (part# 61001001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the gas shock absorber support (part# 61001001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Gas Shock Absorber Support 61001001”

Your email address will not be published. Required fields are marked *