Gasket 62370004
$4.99
Genuine OEM gasket (part# 62370004) for Tornado floor scrubbers. It seals the solution tank outlet joint, directly under the strainer at the top of the water filter assembly.
Genuine OEM gasket (part# 62370004) for Tornado floor scrubbers — compatible machines are listed below. It seals the joint at the solution tank outlet, sitting directly beneath the strainer at the head of the water filter assembly.
This is the first seal in the solution circuit and the one most likely to be reused when it should not be. It spends its life squashed between two faces with cleaning chemistry on one side, and like every elastomer seal it fails by taking a compression set: it stops springing back, stays squashed, and no longer fills the joint. Age, heat and detergent all speed that up.
When it goes, the symptom is rarely a dramatic leak. A tank outlet joint that is weeping lets air into the line as readily as it lets water out, and air in a solution line produces flow that varies from run to run and will not respond predictably to the control. That looks like a pump or valve fault and is not. A slow drip under a parked machine, or a damp patch that reappears after every fill, is the other sign.
Fit a new one whenever the joint is opened. A gasket that has been compressed for a year will not seal reliably a second time, and the cost of finding that out is a repeat visit. Clean both faces properly before fitting — a scale deposit or a strand of old gasket left behind will hold the joint open as effectively as a worn seal. Do not use sealant to rescue a tired gasket on a joint meant to come apart for cleaning.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 15 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the gasket (part# 62370004) seal?
The solution tank outlet joint, directly under the strainer at the head of the water filter assembly. It is the first seal in the solution circuit.
My solution flow is inconsistent but I do not see a leak. Could this be it?
Quite possibly. A weeping tank outlet joint lets air into the line as readily as it lets water out, and air gives flow that varies run to run and will not respond predictably to the control — which looks like a pump or valve fault and is not.
Can I reuse the gasket if it looks fine?
No. Elastomer seals fail by taking a compression set — they stay squashed and stop filling the joint — and that is not reliably visible. Fit a new one whenever the joint is opened, and clean both faces first, since scale or a strand of old gasket will hold the joint open just as effectively.
How do I order the Gasket (part# 62370004) or get help?
You can add the Gasket (part# 62370004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the gasket (part# 62370004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet