Horn 63709009

$44.99

Genuine OEM horn (part# 63709009) for Tornado stand-on floor scrubbers. It is the warning horn mounted on the frame, sounded by the operator at blind corners and in pedestrian traffic.

Genuine OEM horn (part# 63709009) for Tornado stand-on floor scrubbers — the machines it fits are listed below. It is mounted to the machine frame and wired to the operator’s horn control.

On a stand-on scrubber the horn is not a convenience item. These machines are quiet, they are wide, and they are used in exactly the places where people step out from behind racking without looking: warehouse aisle ends, retail back-of-house corridors, school corridors at change-over. The horn is the only way the operator can announce the machine before it arrives, and in most facilities a working horn is a condition of the machine being allowed on the floor at all.

Treat a dead horn as a machine-down fault rather than a nuisance. Before replacing it, check the easy causes: the horn button and its wiring, the connector at the horn itself (this is a frame-mounted component in a wet environment, so a green or crusty connector is common), and the fuse or supply feeding it. A horn that sounds weak, flat or intermittently is usually corroding internally and will fail completely soon.

When fitting, make sure the mounting is solid — a horn on a loose bracket buzzes instead of sounding, and the vibration eventually breaks the wiring at the terminals. Route and secure the wiring clear of the steering and drive components, protect the connector, and test it from the operator position rather than by bridging the terminals.

This is the genuine Tornado part, matched to the machine’s voltage and mounting, so it fits the frame bracket and sounds at the level the machine was certified with.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the frame drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the horn (part# 63709009) do on a Tornado stand-on scrubber?

It is the frame-mounted warning horn, sounded by the operator to announce the machine at blind corners and in pedestrian traffic. These machines are quiet and wide, so the horn is the main way people are warned.

My horn does not work. What should I check first?

Check the horn button and its wiring, the connector at the horn itself (frame-mounted connectors corrode in a wet machine), and the fuse or supply feeding it. A horn that sounds weak, flat or intermittent is corroding internally and will fail soon.

Does a dead horn matter if the machine still cleans?

In most facilities, yes — a working horn is a condition of the machine being allowed on the floor. Treat it as a machine-down fault rather than a nuisance, and test it from the operator position, not by bridging the terminals.

How do I order the Horn (part# 63709009) or get help?

You can add the Horn (part# 63709009) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the horn (part# 63709009) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Horn 63709009”

Your email address will not be published. Required fields are marked *