Hose 14 x 160 47630210
$3.99
Genuine OEM 14 mm x 160 mm hose (part# 47630210) for Tornado floor scrubbers. It is a short solution line section in the water valve assembly.
Genuine OEM hose (part# 47630210), 14 mm bore by 160 mm long, for Tornado floor scrubbers — compatible machines are listed below. It is one of the short solution line sections in the water valve assembly.
Short hose sections exist because the plumbing has to change direction and absorb movement between rigid components. A flexible section between two hard-mounted parts stops vibration being transmitted into fittings, and it lets the assembly be taken apart without fighting the whole circuit. Both the bore and the length matter: a hose with a different bore changes the restriction of the circuit, and one that is too long kinks where there is no space for the extra, while one that is too short pulls on both fittings continuously.
Solution hose fails in ways that are easy to miss. It hardens with age and chemical exposure, so the ends no longer seal on their barbs — which is why a joint that was fine before a service starts weeping afterwards. It takes a permanent set where a clamp has crushed it. And it can develop a hairline split, typically at a bend or just behind a clamp, that weeps only under flow.
On the solution side a weep means air drawn into the line as much as water escaping, so the symptom is inconsistent flow rather than a visible leak — which is why these faults get chased through pumps and valves first.
Replace rather than patch, fit new clamps with the hose, and tighten them only enough to seal; over-tightening grooves a new hose and starts the cycle again.
Compatible Models
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
This part is shared across 5 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the hose (part# 47630210) do?
It is a short flexible solution line section in the water valve assembly, bridging two rigid components so vibration is not transmitted into the fittings and the assembly can be taken apart.
Does the exact size matter?
Yes. The bore changes the restriction of the solution circuit, and the length matters too — too long and it kinks where there is no room, too short and it pulls on both fittings continuously.
How does solution hose fail?
It hardens with age and chemical exposure so the ends stop sealing on their barbs, it takes a permanent set where a clamp has crushed it, and it develops hairline splits at bends or behind clamps that weep only under flow — drawing air in and making flow inconsistent.
How do I order the Hose 14 x 160 (part# 47630210) or get help?
You can add the Hose 14 x 160 (part# 47630210) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the hose 14 x 160 (part# 47630210) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet