Housing, Right, Motor Side, Carpet Dryer X1371
$75.99
Genuine OEM right-hand (motor side) blower housing shell for commercial carpet dryers and air movers — fits Tornado and Powr-Flite models (see the full list below). Carries the motor mounting face, the cord entry and the control-panel cutout.
The right housing is the working half of the blower clamshell. Unlike its opposite number, it carries the motor mounting face that locates the dryer motor concentrically in the scroll, the strain-relief entry where the power cord passes into the machine, and the cutout that the control panel and speed switch sit in. Everything electrical on the unit is referenced off this shell.
Compatible Models
- Tornado: 98774 Windshear 3200, 98786 Windshear 3200
- Powr-Flite: PDS1 Powr-Dryer
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Motor alignment is the reason this part matters more than its price suggests. The fan has to run centred in the scroll; if the motor face is distorted, cracked around a mounting boss, or has had a bolt pulled through it, the fan runs eccentric. That shows up as a rising hum, vibration that loosens other fasteners, and in bad cases the fan wheel clipping the housing wall. Replacing a worn motor without checking the housing face is how a rebuilt machine comes straight back.
Check the cord entry too. A cord that has been yanked repeatedly will elongate the strain-relief slot, and once that happens the conductors take the pull instead of the jacket, which is a genuine shock and short-circuit risk rather than a cosmetic issue. This is the motor side only; the non-motor half is part# X1370. The two halves bolt together with the through-bolts (part# X1377) and flat washers (part# X8218), both sold separately.
Frequently Asked Questions
What does the right housing do on a commercial carpet dryer?
The right housing (part# X1371) is the motor half of the blower clamshell. It locates the dryer motor concentrically in the scroll, carries the power-cord strain-relief entry, and provides the cutout and mounting for the control panel and speed switch.
How do I know if my right housing needs replacing?
Replace it if the motor mounting face is cracked, distorted or has a bolt pulled through it, if the fan is contacting the housing wall, if the cord strain-relief slot has elongated so the cord pulls on the conductors, or if there are cracks through the scroll wall. New vibration after a motor swap often traces back to a damaged housing face rather than the new motor.
What models is the housing, Right, Motor Side, Carpet Dryer (part# X1371) compatible with?
It fits Tornado 98774 Windshear 3200, 98786 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the housing, Right, Motor Side, Carpet Dryer (part# X1371) or get help?
You can add the Housing, Right, Motor Side, Carpet Dryer (part# X1371) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.






Reviews
There are no reviews yet