Tornado Intake Duct 19822

The Intake Duct (part# 19822) is a genuine Tornado OEM replacement part fitted across 4 Tornado wide-area upright models — see the full compatibility list below. It carries airflow from the brush housing up into the bag chamber.

On this machine the intake duct is part of the assembly shown on the model’s parts diagrams. One per machine; inspect the gasket faces at each end when fitting.

When to replace it. Replace the intake duct when it is split, crushed or packed with debris, or you have lost suction with clean filters and a clear bag. Fitting a worn part back during a service is usually a false economy on a machine in daily commercial use, because the failure tends to return quickly and can take neighbouring components with it.

Fitting notes. One per machine; inspect the gasket faces at each end when fitting. Always match electrical parts to your machine’s voltage, and check the serial plate before ordering parts for the later production build. If you are not certain which part you need, give us the callout number from the relevant diagram and we will confirm it against your serial number before you order.

Compatible Models for the Intake Duct

• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E
• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956. You can browse the full machine on the Tornado 93031 Carpetkeeper parts page, see every model we stock parts for on our Tornado cleaning equipment parts page, and read the manufacturer’s own product information at tornadovac.com.

Frequently Asked Questions

What does the Intake Duct do on the Tornado 93031 Carpetkeeper?

The intake duct carries airflow from the brush housing up into the bag chamber.

How do I know if my Intake Duct needs replacing?

Replace it when it is split, crushed or packed with debris, or you have lost suction with clean filters and a clear bag.

What models is the Intake Duct (part# 19822) compatible with?

It fits 4 Tornado wide-area upright models: 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series D; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series E; 93030 30″ Clean-Air Carpetkeeper (Wide Area) Series F.

How do I order the Intake Duct (part# 19822) or get help?

You can add the Intake Duct (part# 19822) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing commercial floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.