Latch 62200004
$19.99
Genuine OEM latch (part# 62200004) for Tornado floor scrubbers. It is the over-centre catch that holds a splash guard or deck component closed.
Genuine OEM latch (part# 62200004) for Tornado floor scrubbers — compatible machines are listed below. On the brush base it is the catch that holds a component closed and releases it for service.
A latch like this is a spring mechanism, not just a hook. It is designed to pull its joint closed with a set tension and hold it there against vibration, so the part it secures stays positioned rather than merely attached. That matters on a scrub head, where a splash guard that is only loosely held stops sealing to the floor and starts letting solution escape past the squeegee — which reads as a suction problem and is not.
It also has to survive being operated wet and gritty by someone in a hurry, usually several times a week, which is why it is a wear part on a machine where most of the hardware is not.
Failures come in two kinds. The latch loses tension, so it still closes but no longer pulls the joint tight: the component rattles, works loose during a shift, and the fault comes and goes in a way that is hard to pin down. Or it breaks — a cracked hook, a broken pivot, a split body — usually from being forced when it was stiff with dried detergent rather than cleaned.
Check it when the brushes are changed. Closed, it should pull the joint tight with no play, and it should operate smoothly rather than needing a hard shove. Clean the mechanism rather than forcing it, and replace a latch that is cracked anywhere or has lost its tension.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the latch (part# 62200004) do?
It is the over-centre catch on the brush base that holds a component such as a splash guard closed, pulling the joint tight with a set tension and holding it against vibration.
Can a weak latch cause a wet floor behind the machine?
Yes, indirectly. A splash guard that is only loosely held stops sealing to the floor and lets solution escape outside the squeegee path, which looks like a suction problem and is not.
When should the latch be replaced?
When it is cracked anywhere, or when it still closes but no longer pulls the joint tight — that gives a component that rattles and works loose during a shift, which is a hard fault to pin down. Clean a stiff latch rather than forcing it; forcing is what breaks them.
How do I order the Latch (part# 62200004) or get help?
You can add the Latch (part# 62200004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the latch (part# 62200004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet