Lid Hinge Bracket X2090

The Lid Hinge Bracket (part# X2090) is a genuine Tacony OEM replacement part compatible with multiple 30″ wide-area upright vacuums across the Tornado, CleanMax and Powr-Flite brands. It is the hinge bracket that carries the lid hinge pin and ties the hinged lid to the main chassis.

Compatible Models for the Lid Hinge Bracket

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series J
• CleanMax CM-WAV
• Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

Symptoms that the lid hinge bracket needs replacing

A failing hinge bracket shows up as a lid problem rather than a bracket problem. The lid sits proud on one side, needs pressure to latch, rattles in use, or drops shut instead of swinging. Look for an elongated or egg-shaped pin hole, a hairline crack radiating from the mounting holes, or a bracket that has been bent by the lid being forced past its stop. Any of these lets the lid lift off the hood gasket while the machine is running.

Replacement notes

Unplug the machine first. Support the lid before driving out the hinge pin (19864) so its weight does not bind the pin in the bracket. Inspect the pin while it is out — a scored or undersized pin will wear a new bracket quickly, so replace both together if either is marked. Check the hood gasket (30079B) at the same time and confirm the lid closes evenly across its whole length before returning the machine to service.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. All parts are sourced directly from Tacony, the manufacturer of Tornado, CleanMax, Riccar, Simplicity and Powr-Flite. Browse the full Tornado 93030 Carpetkeeper main assembly parts list, or see more wide area vacuum parts. Manufacturer information is available at tornadovac.com.

Frequently Asked Questions

What does the Lid Hinge Bracket do on the Tornado 93030?

It is the bracket that carries the lid hinge pin (19864) and anchors the hinged lid to the main chassis, so the lid pivots open squarely and closes flush against the hood gasket (30079B) to keep the bag compartment sealed.

How do I know if my Lid Hinge Bracket (part# X2090) needs replacing?

Replace it if the lid sits crooked or will not close flush, if the hinge pin has worn an elongated slot in the bracket, or if the bracket is cracked or bent. A worn bracket lets the lid sag, which breaks the seal at the hood gasket and costs you suction even though the motor and filters are fine.

What models is the Lid Hinge Bracket (part# X2090) compatible with?

The Lid Hinge Bracket (part# X2090) fits: Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series J; CleanMax CM-WAV; and Powr-Flite PF2030 30-Inch Wide Area Commercial Vacuum. If your machine is not on this list, call 763-535-0770 and we will confirm it against your serial number before you order.

How do I order the Lid Hinge Bracket (part# X2090) or get help?

You can add the Lid Hinge Bracket (part# X2090) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.