Lindhaus Bumper 14 inch Grey 000590112

The Lindhaus 14 inch Bumper in grey (part# 000590112) is a genuine Lindhaus replacement part for the 14″ power nozzle used on the Lindhaus HCP 14″ and Lindhaus PB14e. The Lindhaus 14 inch Bumper is the protective trim strip that wraps the front and sides of the nozzle, taking the impact when the head meets furniture legs, baseboards, and door casings so the housing and the finished surfaces both stay unmarked. Because it absorbs every bump, it is a natural wear part that gets scuffed, compressed, and eventually torn over years of commercial use.

What the lindhaus 14 inch bumper does

Fitted around the perimeter of the nozzle, the Lindhaus 14 inch Bumper acts as a cushion between the rigid nozzle housing and everything the operator drives it into. A supple, intact bumper protects walls and furniture from scuff marks and shields the plastic housing from cracking on impact. Once the bumper hardens, splits, or works loose, the nozzle starts leaving marks and the housing edges are left exposed to damage.

Common signs that the Lindhaus 14 inch Bumper needs replacing include a bumper that is torn, flattened, or hanging loose from its channel, black scuff marks appearing on baseboards and furniture, or brittle, cracked trim that no longer cushions impacts. Fitting a fresh grey Lindhaus 14 inch Bumper restores the nozzle’s protective edge and keeps a professional appearance on the job.

Installation is quick and requires no special tools: unplug the vacuum, peel or unclip the old bumper from its retaining channel, and press the new part into place around the nozzle. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956, so if you want us to confirm this is the correct bumper for your machine, just ask. Browse more Lindhaus vacuum parts, or view the full range at the official Lindhaus site.

Compatible Models

• Lindhaus HCP 14″
• Lindhaus PB14e

Lindhaus 14 inch Bumper — Frequently Asked Questions

What does the Lindhaus 14 inch Bumper (part# 000590112) do?

It is the protective grey trim strip around the 14″ nozzle that cushions impacts with furniture, walls, and baseboards, protecting both the surfaces and the nozzle housing.

How do I know if my Lindhaus 14 inch Bumper needs replacing?

A torn, flattened, brittle, or loose bumper, or new scuff marks appearing on baseboards and furniture, means the bumper should be replaced.

What models is the Lindhaus 14 inch Bumper (part# 000590112) compatible with?

It fits the Lindhaus HCP 14″ and the Lindhaus PB14e.

How do I order the Lindhaus 14 inch Bumper (part# 000590112) or get help?

You can add the Lindhaus 14 inch Bumper (part# 000590112) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.