Lock Nut 60220801

$1.99

Genuine OEM lock nut (part# 60220801) for Tornado floor scrubbers. It is the self-locking nut used on the frame where a bolted joint has to hold against vibration without backing off.

Genuine OEM lock nut (part# 60220801) for Tornado floor scrubbers — compatible machines are listed below. On the frame assembly it is the nut used where a bolt passes through and has to be secured from the far side, at a joint that cannot be allowed to loosen.

A lock nut is not just a nut. It carries a deliberate interference — a nylon insert or a deformed crown, depending on the type — that grips the bolt thread and resists the rotation that vibration would otherwise cause. A stand-on scrubber vibrates constantly: brush motors, vacuum motor, castors drumming over floor joints and thresholds. An ordinary nut on that duty walks loose, and the joint it was holding starts hammering.

The important service point is that the locking feature is consumable. Every time the nut is removed and refitted it grips a little less, and after two or three cycles it spins down with almost no resistance — at which point it is just a nut that looks like a lock nut. So fit a NEW lock nut whenever you take a joint apart; this is the single most commonly skipped step in frame reassembly, and it is why a bracket that was retightened last month is loose again.

Replace it, rather than reusing it, if it threads on easily by hand all the way (the locking feature is dead), if the nylon insert is missing, chewed or heat-glazed, or if the hex is rounded. Do not try to restore a worn lock nut with thread adhesive on a frame joint that needs to come apart again.

This is the genuine Tornado part, so the locking torque is what the joint was designed around.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 28 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the frame drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the lock nut (part# 60220801) do on a Tornado floor scrubber?

It secures a through-bolt on the frame at a joint that must not loosen. Its nylon insert or deformed crown grips the bolt thread and resists the rotation that the machine’s constant vibration would otherwise cause.

Can I reuse a lock nut?

No — fit a new one. The locking feature is consumable: each removal and refit grips less, and after two or three cycles the nut spins down with almost no resistance. Reusing one is the most commonly skipped step in frame reassembly and the usual reason a bracket is loose again a month later.

How do I know a lock nut is worn out?

It threads on easily by hand all the way, the nylon insert is missing, chewed or heat-glazed, or the hex is rounded. Do not try to rescue it with thread adhesive on a joint that needs to come apart again.

How do I order the Lock Nut (part# 60220801) or get help?

You can add the Lock Nut (part# 60220801) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut (part# 60220801) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Lock Nut 60220801”

Your email address will not be published. Required fields are marked *