Lock Nut INOX 60221202
$1.99
Genuine OEM stainless nylon-insert lock nut (part# 60221202) for Tornado floor scrubbers. It is the large stainless lock nut used at the heaviest joints of the squeegee control assembly, including the squeegee arm and support mountings.
Genuine OEM stainless (INOX) nylon-insert lock nut (part# 60221202) for Tornado floor scrubbers — the machine list is below. On the squeegee control assembly it is the largest of the lock nuts, used at the heavy joints: the squeegee arm mounting, the support joints and the main structural pivots that carry the whole squeegee.
Size is the point. These joints take the weight of the squeegee and every impact it absorbs, so the fasteners step up accordingly. A nut of this size has more thread engagement and a larger bearing face than the small lock nuts used along the linkage, which is what lets the joint hold under shock loading rather than just under steady vibration.
It is also stainless, and for the same reason as the rest of the hardware at this end of the machine: it lives in the water path off the squeegee blades and it has to come undone again. Blade changes, squeegee removal for cleaning, and seasonal service all depend on this fastener being serviceable years after it was fitted. A corroded nut at a structural mounting is how a routine blade change turns into cutting hardware off the machine.
As with every nylon-insert nut, it is single-use. Replace it whenever the joint is opened. At inspection, replace any that can be run down a clean thread by hand, that show a crumbling, melted or missing insert, that have rounded hex corners, or that are corroded. Because this nut sits at the structural joints, check it with a wrench at every service rather than relying on a visual check — these are the fasteners where a failure does real damage.
This is the genuine Tornado part in the correct size, pattern and material, so the squeegee mountings hold to their designed load and still come apart cleanly when they need to.
Compatible Models
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 21 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the lock nut (part# 60221202) used on a Tornado floor scrubber?
At the heavy joints of the squeegee control assembly — the squeegee arm mounting, the support joints and the main structural pivots that carry the weight of the squeegee.
How is it different from the smaller lock nuts in the same assembly?
It is larger, with more thread engagement and a bigger bearing face, because these joints take the squeegee weight plus every impact it absorbs. The small lock nuts along the linkage only have to resist steady vibration.
How often should I check it?
With a wrench at every service, not just by eye. These are the structural fasteners, so a failure here does real damage. Replace any nut that can be run down a clean thread by hand or that shows a crumbling, melted or missing insert, rounded corners or corrosion.
How do I order the Lock Nut INOX (part# 60221202) or get help?
You can add the Lock Nut INOX (part# 60221202) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut inox (part# 60221202) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet