Lock Nut M4 60220401
$1.99
Genuine OEM M4 lock nut (part# 60220401) for Tornado floor scrubbers. It is the self-locking nut used behind component and bracket mountings.
Genuine OEM M4 lock nut (part# 60220401) for Tornado floor scrubbers — the machines it fits are listed below. It secures M4 fastenings behind component and bracket mountings across a wide range of Tornado equipment.
A self-locking nut earns its place anywhere a joint is subject to continuous vibration, which on a floor machine is everywhere. Two brush motors, a vacuum motor and castors running over joints and thresholds mean nothing on this machine is ever still, and an ordinary nut in that environment rotates slowly off its thread over weeks.
What makes M4 worth thinking about specifically is the mismatch between the size of the fastener and the consequence of it loosening. These nuts hold brackets that position things — switches, sensors, boards, cable anchors — so the failure is not a part falling off, it is a part sitting slightly out of place and a fault that comes and goes.
The locking feature is consumable and single-use in practice. Grip reduces with every removal and refit; after a few cycles the nut spins down freely and no longer locks anything, while looking exactly as it did when new. Fit a new one each time the joint is opened.
Fit the washer the assembly calls for. At M4 the bearing area under the nut is small enough to dent sheet metal or a plastic housing, and a dent means the clamp load is lost within weeks.
Replace any nut whose insert is missing, chewed, hardened or glazed, or whose hex is rounded.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
This part is shared across 23 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the M4 lock nut (part# 60220401) used?
Behind component and bracket mountings, across a wide range of Tornado machines, wherever an M4 joint must hold against vibration.
What actually goes wrong if one loosens?
Not a part falling off. These hold brackets that position things — switches, sensors, boards, cable anchors — so the result is a part sitting slightly out of place and a fault that comes and goes.
Why does it need a washer?
Because at M4 the bearing area under the nut is small enough to dent sheet metal or a plastic housing, and once there is a dent the clamp load is lost within weeks.
How do I order the Lock Nut M4 (part# 60220401) or get help?
You can add the Lock Nut M4 (part# 60220401) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut m4 (part# 60220401) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet