Lock Nut M5 60220502
$1.99
Genuine OEM M5 lock nut (part# 60220502) for Tornado floor scrubbers. It is the self-locking nut used where a battery-area fastening must not shake loose.
Genuine OEM M5 lock nut (part# 60220502) for Tornado floor scrubbers — the machines it fits are listed below. On the battery charger assembly it secures an M5 fastening at a joint that has to hold against continuous vibration.
The nut carries a deliberate interference — a nylon insert or a deformed crown — that grips the bolt thread and resists the rotation vibration would otherwise cause. In a battery compartment that matters for a specific reason: the components here are heavy, and a bracket whose fastening has backed off starts to move under the weight it is carrying, which both wears its own mounting and chafes whatever wiring runs nearby.
The locking feature is consumable, and this is the rule most often skipped. Every removal and refit grips a little less, and after two or three cycles the nut spins down with almost no resistance — at which point it is a plain nut that looks like a lock nut. Fit a new one whenever the joint comes apart.
Corrosion is the other factor here. Charging in a vented lead-acid compartment gives off acid mist, which attacks fasteners and also degrades a nylon insert over time. A nut that comes out of a battery area chalky, pitted, or with a hardened insert should not go back in regardless of how many times it has been off.
Replace rather than reuse a nut that threads on easily by hand all the way, whose insert is missing, chewed or glazed, or whose hex is rounded. Where the assembly specifies a lock nut, do not substitute a plain one.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the battery charger drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the M5 lock nut (part# 60220502) do?
Its nylon insert or deformed crown grips the bolt thread and resists the rotation that machine vibration would otherwise cause, holding battery-area fastenings secure.
Can I reuse one?
No. The locking feature is consumable — each removal and refit grips less, and after two or three cycles it spins down freely and is just a plain nut in a lock nut’s shape.
Does the battery compartment affect these nuts?
Yes. Charging in a vented lead-acid compartment gives off acid mist, which attacks the fastener and degrades the nylon insert. A nut that comes out chalky, pitted or with a hardened insert should not go back in, however few times it has been off.
How do I order the Lock Nut M5 (part# 60220502) or get help?
You can add the Lock Nut M5 (part# 60220502) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut m5 (part# 60220502) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet