Lock Washer 60505003

$1.99

Genuine Tornado lock washer (part# 60505003) — fits 21 Tornado scrubber models including the BDSO 27/28. Spring washer that maintains tension under vibration.

Genuine Tornado lock washer, part number 60505003, used on 21 Tornado scrubber models including the BDSO 27/28. A spring lock washer is compressed flat when the joint is tightened and pushes back for the life of the joint, keeping tension on the thread as components settle and the machine vibrates.

Its failure mode is being left out. A joint reassembled without its lock washer is tight on the day and loose a month later, and the part that then rattles loose — a bracket, a guide, a tank fitting — gets replaced while the actual cause stays missing from the stack. If a particular fastener on your machine keeps backing off, check the drawing for a lock washer before you reach for thread lock.

Lock washers are single-use in practice. One that has been compressed flat and does not spring back when removed has given up its tension and will not restore it. They cost very little, so fit new ones whenever a joint is opened, in the order the drawing shows: flat washer against the part, lock washer against the nut or head.

Call 763-535-0770 if you want to confirm the size against the washer in your machine before ordering.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 20 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the recovery tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does a lock washer do?

It is compressed flat when the joint is tightened and pushes back continuously, keeping tension on the thread as components settle and the machine vibrates.

A bolt on my machine keeps working loose. What should I check?

Check the drawing for a lock washer in that stack. A joint rebuilt without its lock washer is tight on the day and loose a month later, and the rattling part usually gets blamed instead.

What models is this lock washer (part# 60505003) compatible with?

Tornado lists it on 21 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order this lock washer (part# 60505003) or get help?

You can add the lock washer (part# 60505003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock washer (part# 60505003) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does a lock washer do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is compressed flat when the joint is tightened and pushes back continuously, keeping tension on the thread as components settle and the machine vibrates.”}},{“@type”:”Question”,”name”:”A bolt on my machine keeps working loose. What should I check?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Check the drawing for a lock washer in that stack. A joint rebuilt without its lock washer is tight on the day and loose a month later, and the rattling part usually gets blamed instead.”}},{“@type”:”Question”,”name”:”What models is this lock washer (part# 60505003) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Tornado lists it on 21 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.”}},{“@type”:”Question”,”name”:”How do I order this lock washer (part# 60505003) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the lock washer (part# 60505003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Lock Washer 60505003”

Your email address will not be published. Required fields are marked *