Lock Washer INOX 60510007
$1.99
Genuine OEM stainless lock washer (part# 60510007) for Tornado floor scrubbers. It is the larger stainless lock washer in the steering group, used under the heavier fasteners that carry steering loads.
Genuine OEM stainless (INOX) lock washer (part# 60510007), fitted to a range of Tornado floor scrubbers — the machine list is below. On the steering wheel assembly it is the larger of the stainless lock washers, used under the heavier fasteners rather than the bracket and cover screws.
Size is why it is a separate part number from the smaller lock washer in the same group, and the difference is not cosmetic. A lock washer has to match the fastener it sits under: too small and it does not bear properly on the head, too large and it can sit on a chamfer or a radius instead of a flat face. Either way the spring force ends up in the wrong place and the joint loosens anyway. On a bench of similar-looking stainless hardware these two get mixed up constantly, so it is worth keeping them separated.
The position it protects takes real load. These are the fasteners holding steering components rather than covers, so a joint that works loose here is felt at the wheel as play, and the hole it is in starts to wallow once movement begins. That is the expensive outcome the washer exists to prevent.
Treat it as a consumable. Replace it whenever the joint is opened, and replace on sight any that lies flat on a bench instead of standing proud, that is cracked, or that shows corrosion. Check the fastener and the face it bears on at the same time — a lock washer that has been dead for a while usually leaves a polished or fretted patch where the joint has been moving.
This is the genuine Tornado part in the correct size and material for the fasteners it belongs with.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado TS350-W20-U — 99694
- Tornado BD 32/26 — 99732
- Tornado BD 33/30 — 99780
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
How is this different from the other stainless lock washer in the steering group?
It is larger, sized for the heavier fasteners that hold steering components rather than the smaller screws holding brackets and covers. The two look similar on a bench and get mixed up easily, so keep them separated.
Why does fitting the wrong size matter?
Because a lock washer has to bear on a flat face under the fastener head. Too small and it does not bear properly; too large and it can sit on a chamfer or radius. Either way the spring force ends up in the wrong place and the joint loosens anyway.
How do I know if the lock washer (part# 60510007) needs replacing?
Replace it if it lies flat on a bench instead of standing proud, if it is cracked, or if it shows corrosion — and whenever the joint is opened. Check the fastener and its bearing face too; a dead lock washer usually leaves a polished or fretted patch.
How do I order the Lock Washer INOX (part# 60510007) or get help?
You can add the Lock Washer INOX (part# 60510007) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock washer inox (part# 60510007) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet