Lock Washer M5 60505002

$1.99

Genuine OEM lock washer m5 (part# 60505002) used across a wide range of Tornado floor scrubbers, including the BDSO 20/21 central frame. Confirmed on 13 machines.

This lock washer m5 (part# 60505002) is a genuine OEM component used across a wide range of Tornado floor scrubbers, including the central frame of the BDSO 20/21 stand-on machine. A split lock washer sized for M5 fasteners, used under nuts and screw heads where vibration would otherwise back a joint off.

Small fasteners and washers are the items most often reused past their useful life. They are disturbed at every service, they live in an area that gets wet with cleaning solution, and they carry vibration continuously. A lock washer that has lost its spring no longer does anything, and a screw whose drive has burred cannot be pulled to the right torque. Either way the joint is not clamped, and an unclamped joint wears the parts it was supposed to hold.

Order by part number rather than matching by eye – several similar sizes appear across this machine, and the wrong one either leaves too little thread engaged or sits proud and stops the joint pulling down. Because this item is confirmed on 13 Tornado machines in the factory book, it is worth keeping a few on the shelf if you run more than one of these.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, UG and UE
  • Tornado 99780 BD 33/30
  • Tornado TS350-W20-U (99694)
  • Tornado 99785 BR 33/30
  • Tornado 99695T BR 22/14T
  • Tornado 99775 BR 28/27
  • Tornado 99720 BD 26/14
  • Tornado TS120-S53-U (99680blt)
  • Tornado TS530-W26-U
  • Tornado 99728 BD 28/20
  • Tornado TS530-W30-U

The factory book lists this part on 13 machines in total; the models above are the ones we have confirmed directly. Call 763-535-0770 with your model and serial number. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Lock Washer M5 FAQ

Which machines does the lock washer m5 (part# 60505002) fit?
The factory parts book lists it on 13 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.

When should the lock washer m5 (part# 60505002) be replaced?
Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.

Can I substitute a hardware-store equivalent?
We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.

How do I order the lock washer m5 (part# 60505002) or get help?
You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Which machines does the lock washer m5 (part# 60505002) fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The factory parts book lists it on 13 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.”}},{“@type”:”Question”,”name”:”When should the lock washer m5 (part# 60505002) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.”}},{“@type”:”Question”,”name”:”Can I substitute a hardware-store equivalent?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.”}},{“@type”:”Question”,”name”:”How do I order the lock washer m5 (part# 60505002) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Lock Washer M5 60505002”

Your email address will not be published. Required fields are marked *