Tornado Nut for 3/8 in. Hardware X8231
$2.99
Genuine OEM nut (part# X8231) for commercial high-speed burnishers — the nut listed with the 3/8-16 screw and washer on every Brute Force drawing. Fits all Tornado Brute Force burnishers (see full list below).
The X8231 is the nut in the heavy hardware group on the Brute Force burnisher drawings, listed with the 3/8-16 screw (X8223) and the washer (X8230). It appears on all four drawings in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings. It is a shared part used across Tornado machines — see the full list of models below.
The nut is the half of a bolted joint that is most often re-used and least often inspected, which is backwards. On a machine that vibrates continuously, a nut that has been run on and off a dozen times has threads that no longer fit tightly, and a loose thread fit means the joint relies entirely on whatever lock hardware is fitted. That is how a fastener that was torqued correctly on the bench is finger-loose a month later.
Replace the X8231 if the thread feels sloppy or gritty when run onto a new screw, if the hex corners are rounded, if it has been heated or cut during a previous repair, or if it is corroded. The quick test on the bench is to thread it on by hand: a good nut runs smoothly and takes a little effort at the end; a worn one spins freely all the way down and then does not feel like it is biting.
Because the nut is at one end of the machine’s most heavily loaded joint, it is worth doing properly: fit a new nut and washer and re-use the screw only if its threads are clean and unstretched. The nut is shared hardware across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the hardware at a callout listed before ordering.
Compatible Models
- Tornado models:
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
What does the nut (part# X8231) do on a burnisher?
It is the nut for the 3/8-16 hardware group — the heaviest bolted joint on the machine — and is listed with the X8223 screw and X8230 washer.
How do I know if my X8231 nut needs replacing?
Thread it onto a new screw by hand: a good nut runs smoothly and tightens at the end, while a worn one spins freely all the way. Also replace it if the hex is rounded, if it has been heated or cut, or if it is corroded.
Is it worth replacing a nut rather than re-using it?
On a machine that vibrates all day, yes. A nut that has been run on and off repeatedly has a loose thread fit, which lets a correctly torqued joint go slack within weeks.
What models is the nut (part# X8231) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the nut (part# X8231) or get help?
You can add the nut (part# X8231) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet