Nut 60210401
$1.99
Genuine OEM small hex nut (part# 60210401) for Tornado floor scrubbers. It secures a light fastening in the steering group where a small screw passes through a bracket and is nutted on the far side.
Genuine OEM small hex nut (part# 60210401), used on a range of Tornado floor scrubbers — the machine list is below. On the steering wheel assembly it is the nut on the far side of a light bracket fastening, paired with one of the small screws used in that group.
Small nuts in a steering assembly do not look important and are easy to lose. What they hold is usually a bracket, a clip or a cover mount rather than a structural joint, but a bracket that comes loose in the steering area rattles against the column, wears a path into whatever it touches, and sometimes ends up resting against wiring. The nut is cheap; the consequence of it going missing is not always.
Check these at service by hand and with a wrench. A small nut that can be turned with fingers has lost its clamp and will shortly fall off, and the screw it was on will follow. If one is already missing, look for the screw before fitting a replacement — a loose screw rolling around inside a cover is a short circuit looking for somewhere to happen.
Replace the nut if the hex corners are rounded, if the thread is damaged or galled, if the bearing face is corroded, or if it spins freely on a clean screw when it should take some effort near the end. Keep a few on the shelf: these are the parts a service stops for, and the stop is always longer than the part is worth.
This is the genuine Tornado part in the correct size and pattern, so the joint clamps on a full clean thread.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 8 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the nut (part# 60210401) do on a Tornado floor scrubber?
It secures a light fastening in the steering wheel assembly — a bracket, clip or cover mount — on the far side of one of the small screws used in that group.
Does it matter if a small nut like this is missing?
Yes. The bracket it held rattles against the column and wears a path into whatever it touches, and the screw it was on usually ends up loose inside a cover, where it is a short circuit waiting to happen. Find the screw before fitting a replacement nut.
How do I know if the nut (part# 60210401) needs replacing?
Replace it if the hex corners are rounded, the thread is damaged or galled, the bearing face is corroded, or it spins freely on a clean screw when it should take some effort near the end.
How do I order the Nut (part# 60210401) or get help?
You can add the Nut (part# 60210401) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nut (part# 60210401) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the nut (part# 60210401) do on a Tornado floor scrubber?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It secures a light fastening in the steering wheel assembly — a bracket, clip or cover mount — on the far side of one of the small screws used in that group.”}},{“@type”:”Question”,”name”:”Does it matter if a small nut like this is missing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. The bracket it held rattles against the column and wears a path into whatever it touches, and the screw it was on usually ends up loose inside a cover, where it is a short circuit waiting to happen. Find the screw before fitting a replacement nut.”}},{“@type”:”Question”,”name”:”How do I know if the nut (part# 60210401) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Replace it if the hex corners are rounded, the thread is damaged or galled, the bearing face is corroded, or it spins freely on a clean screw when it should take some effort near the end.”}},{“@type”:”Question”,”name”:”How do I order the Nut (part# 60210401) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the Nut (part# 60210401) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet