Nut 60210811

$1.99

Genuine OEM hex nut (part# 60210811) for Tornado floor scrubbers. It secures a fastening point in the steering group where the joint is set to a clamp load and checked at service rather than locked permanently.

Genuine OEM hex nut (part# 60210811), used on a range of Tornado floor scrubbers — the full machine list is below. On the steering wheel assembly it secures a bolted joint, working with the washers in the same stack.

A plain nut is specified where a joint is meant to be set to a clamp load and then checked, rather than fitted once and forgotten. The advantage over a nylon-insert nut is honesty: put a wrench on a plain nut and you can feel immediately whether the joint has moved. A nyloc feels tight going on whether or not the joint beneath it still has clamp, which hides exactly the fault you are looking for in a steering assembly.

Check it at every steering service. If it moves, do not simply retighten and move on — something let it move. Look at the washer beneath for dishing, at the bracket for an impression or a wallowed hole, and at the bolt for stretch. Retightening a joint whose washer has flattened buys a couple of weeks.

Replace the nut itself if the hex corners are rounded from a slipping wrench, if the thread is galled or it runs rough on a clean bolt, if the bearing face is pitted by corrosion, or if it has ever been heated to get it free. A nut whose face is no longer flat cannot clamp evenly however hard it is torqued, and uneven clamp in the steering group shows up as play the operator can feel.

This is the genuine Tornado part in the correct size and pattern, so the joint reaches its intended clamp load on a full, clean thread.

Compatible Models

This part is shared across 7 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the nut (part# 60210811) do on a Tornado floor scrubber?

It secures a bolted joint in the steering wheel assembly, working with the washers in the same stack to hold the joint at its intended clamp load.

Why a plain nut rather than a lock nut here?

Because this joint is meant to be checked at service. A plain nut gives honest feedback on a wrench, so you can feel whether the joint has moved. A nylon-insert nut feels tight going on whether or not the joint still has clamp load.

The nut keeps loosening. What should I check?

Not just the nut. Look at the washer beneath for dishing, the bracket for an impression or a wallowed hole, and the bolt for stretch. Retightening a joint whose washer has flattened buys a couple of weeks at most.

How do I order the Nut (part# 60210811) or get help?

You can add the Nut (part# 60210811) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nut (part# 60210811) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Nut 60210811”

Your email address will not be published. Required fields are marked *