Nylon Flanged Bushing 62406027
$2.99
Genuine OEM nylon flanged bushing (part# 62406027) for Tornado stand-on floor scrubbers. It is the self-lubricating sleeve in a frame pivot, with a flange that also takes the thrust load.
Genuine OEM nylon flanged bushing (part# 62406027) for Tornado stand-on floor scrubbers — see the machine list below. On the frame assembly it sleeves a pivot, and the flange at one end carries the sideways load as well, so one part does both the radial and the thrust job.
Nylon is chosen here for a specific reason: it runs dry. A greased metal bushing in the underside of a scrubber collects grit from the floor and turns that grease into grinding paste. Nylon needs no lubrication, sheds water, and when it does wear it wears itself rather than the steel pivot running in it — which is the whole point of fitting a bushing.
Signs it is due: play in the joint when the part it carries is rocked by hand, a creak or squeak as the joint moves that goes away when it is wet, visible flattening of the flange, or a bushing that has started turning in its housing rather than letting the shaft turn inside it. Nylon also goes brittle with age and UV, so a bushing that cracks when it is pressed out was probably already past its best.
Fit it without grease. Clean the housing and the shaft, check the shaft for scoring or a wear step, and press the bushing in squarely — a nylon bushing driven in at an angle will be tight on one side and loose on the other, and will wear unevenly from day one. If the machine uses the same bushing at a pair of pivots, change both.
This is the genuine Tornado part in the correct bore, length and flange size, so the pivot keeps its designed clearance.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the frame drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the nylon flanged bushing (part# 62406027) do?
It sleeves a pivot on the frame assembly, with the flange taking the sideways thrust load as well as the radial load, so the shaft turns on a renewable nylon surface rather than directly on steel.
Should I grease it?
No. Nylon runs dry by design. Grease in the underside of a scrubber collects floor grit and turns into grinding paste, which is exactly what this bushing exists to avoid.
How do I know if the bushing (part# 62406027) needs replacing?
Look for play when the joint is rocked by hand, a creak or squeak that stops when it is wet, a flattened flange, or a bushing turning in its housing instead of letting the shaft turn in it. Brittleness on removal means it was already past its best.
How do I order the Nylon Flanged Bushing (part# 62406027) or get help?
You can add the Nylon Flanged Bushing (part# 62406027) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nylon flanged bushing (part# 62406027) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet