Tornado O-Groove Motor Pulley X9298

$37.99

Genuine OEM O-groove motor pulley (part# X9298) for 2,000 RPM commercial burnishers — the motor-shaft pulley that sets pad speed on the 2000-series machines. Fits the Tornado Brute Force 2000 (98482B) and 2000 Dust Control (98486) and Powr-Flite M2000 (see full list below).

SKU: X9298 Category: Brand:

The X9298 is the O-groove motor pulley used on the 2,000 RPM burnishers. It appears on the Brute Force 2000 (98482B) drawing and on both Brute Force 2000 Dust Control (98486) drawings, and it is catalogued as the M2000 O-groove pulley, which makes it a cross-brand part shared with the Powr-Flite M2000 rather than a Tornado-only one. The Brute Force 1600 (98458B) uses a different motor pulley (X8889) — that difference in pulley diameter is part of what makes one machine a 1600 and the other a 2000.

An O-groove profile is a rounded groove rather than a sharp V. It is specified to suit the belt section used here and it changes how the belt seats: the belt must bed into the radius without riding on the shoulders, which is why mixing pulley profiles and belt sections on a drive is a reliable way to destroy belts.

Replace the X9298 when the groove is worn beyond its profile, polished glassy, or packed with baked finish dust that will not clean out; when the flanks are chipped; when the bore or set-screw seat lets the pulley creep on the motor shaft; or when there is visible run-out. A pulley that creeps is the urgent case, because it will score the motor shaft and a scored motor shaft turns a pulley job into a motor job.

Fit a new V-belt (X8099-5) with any pulley change and inspect the main pulley (X8096) at the same time. Never fit the 1600’s pulley to a 2000 or the other way round to change pad speed: speed on these machines is matched to the motor, the pad and the floor finish, and overspeeding burns floors and shortens motor life. Call 763-535-0770 with your model and serial number if you want it listed before ordering.

Compatible Models

Frequently asked questions

What does the O-groove motor pulley (part# X9298) do on a burnisher?

It is the pulley on the motor shaft that drives the belt. With the main pulley it sets the pad speed of the 2,000 RPM machines.

How do I know if my X9298 motor pulley needs replacing?

Replace it if the groove is worn past its profile, polished glassy or packed with baked finish, if the flanks are chipped, if the pulley creeps on the motor shaft, or if there is visible run-out.

Can I fit the 98458B pulley to a 2000-series machine?

No. The 1600 uses the X8889 and the 2000 machines use the X9298, and the difference in pulley diameter is part of what sets each machine’s pad speed. Changing it overspeeds or underspeeds the pad.

What models is the O-groove motor pulley (part# X9298) compatible with?

The Tornado Brute Force 2000 High-Speed Glazer (98482B) and Brute Force 2000 Dust Control (98486), and Powr-Flite M2000 burnishers.

How do I order the O-groove motor pulley (part# X9298) or get help?

You can add the motor pulley (part# X9298) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Tornado O-Groove Motor Pulley X9298”

Your email address will not be published. Required fields are marked *