Part No. 114. Lindhaus LS50 Electric – Base LS50 Electric – 181961281
The Lindhaus LS50 base, part number 181961281, is the lower housing that forms the foundation of your LS50 vacuum, carrying the brushroll chamber, the wheels, and the connection to the handle assembly.
Why the Lindhaus LS50 base matters
As the structural core of the machine, the base holds the moving components in alignment and keeps the nozzle sealed against the floor for proper airflow. A cracked or warped base lets air leak, throws the brushroll out of alignment, and can make the vacuum wobble or scrape as you push it.
Consider a new base if the old one is cracked from a drop or impact, if the mounting bosses for the wheels or covers have broken, if suction has dropped because the base no longer seals, or if hardware no longer bites because the plastic around a screw post has stripped. Rattling, an uneven ride, and pieces that will no longer clip into place are all signs the housing has reached the end of its service life.
Rebuilding onto a new base is a full teardown job. The wheels, brushroll, covers, and internal parts are transferred from the old housing to the new 181961281 base, then reassembled. Working methodically and keeping track of each fastener makes the rebuild straightforward, and our technicians can handle the swap if you would rather not disassemble the machine.
Because everything else on the vacuum bolts to it, replacing a damaged Lindhaus LS50 base is often the smartest way to give an otherwise good machine a second life. With a fresh housing the wheels roll true, the covers snap tight, and the nozzle seals to the floor again.
Compatible Models
- Lindhaus LS50 Electric
- Lindhaus LS50 Hybrid
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus LS50 parts or explore the full lineup at Lindhaus.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
What does the Lindhaus LS50 base do?
The base, part number 181961281, is the lower housing that carries the brushroll chamber, wheels, and handle connection and keeps the nozzle sealed to the floor on the LS50.
How do I know my LS50 base needs replacing?
Replace it if the housing is cracked, mounting bosses have broken, suction has dropped because it no longer seals, or screw posts have stripped so parts will not stay attached.
What models and part number does this base fit?
This is Lindhaus part number 181961281 and it fits the Lindhaus LS50 Electric and Lindhaus LS50 Hybrid uprights.
How do I order the Lindhaus LS50 base?
To order the Base, part number 181961281, add it to your cart on this page, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has served Lindhaus owners since 1956.
