Tornado Plastic Plug X8151B

$2.99

Genuine OEM plastic plug (part# X8151B) for commercial high-speed burnishers — the snap-in plug that closes an unused opening in the housing or switch box. Fits all Tornado Brute Force burnishers (see full list below).

SKU: X8151B Category: Brand:

The X8151B is a plastic plug used to close an opening in the machine. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B) and on the Brute Force 2000 (98482B) and both Brute Force 2000 Dust Control (98486) drawings, listed near the switch box covers at the top of the handle. It is a shared part used across Tornado machines — see the full list of models below.

Plugs exist because a moulded or pressed part is made with more openings than any one build uses — a hole for an option, an access hole for assembly, a knockout for a different market. Leaving one open on a wet-use machine with mains wiring behind it is not acceptable, so the plug closes it. It is a small part doing a safety job.

Replace the X8151B when it is missing, cracked, or when its retaining tabs or ribs have broken so it no longer stays in place under vibration. A plug that has fallen out is worth chasing immediately: the opening it left is a direct path for mop water, finish mist and dust into the switch box or housing, and anything conductive that gets in there is a shock and short risk. If you find a machine with an open hole and no plug, do not tape it — tape peels in a wet environment and leaves adhesive that makes the correct repair harder.

Keep a couple on the shelf; plugs are among the parts most often lost during a service because they are small and come out with the covers. The part is shared across the whole Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you need help identifying which plug goes where on your machine.

Compatible Models

Frequently asked questions

What does the plastic plug (part# X8151B) do on a burnisher?

It closes an unused opening in the housing or switch box so water, finish mist and dust cannot get into the machine or reach live wiring.

How do I know if my X8151B plug needs replacing?

Replace it if it is missing, cracked, or if its retaining tabs have broken so it will not stay seated under vibration.

Can I tape over the hole instead?

No. Tape lifts in a wet environment and leaves adhesive that makes the proper repair harder. Fit the correct plug — it is a safety part on a machine with mains wiring inside.

What models is the plastic plug (part# X8151B) compatible with?

All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).

How do I order the plastic plug (part# X8151B) or get help?

You can add the plastic plug (part# X8151B) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Tornado Plastic Plug X8151B”

Your email address will not be published. Required fields are marked *