Powr-Flite Extractor Power Cord 25 ft X2019

The Powr-Flite power cord (part# X2019) is a genuine 25-foot 3-prong replacement power cord for Powr-Flite carpet extractors. It carries line voltage to the machine’s vacuum motor, solution pump, and heater, and its length gives operators room to reach across large rooms from a single outlet. Because it is dragged, coiled, and pinched every working day, the cord is a genuine wear item worth keeping on the truck.

Compatible Models for the Powr-Flite Power Cord (X2019)

This is a shared Powr-Flite OEM component used across the PE-series and TE-series carpet extractors:

• Pulsar / PE-series: Pulsar Gamma PE200-G10-U, PE200-G15-U, PE310-G10-U, PE310-G15-U, PE060-G15-U
• TE-series: TE200-G15-U, TE310-G15-U, TE060-G15-U, TE251-G15-U

Not sure if this fits your machine? Call us at 763-535-0770 and we will confirm compatibility for you.

Signs your X2019 power cord needs replacing

Look for cracked, brittle, or split outer insulation, any exposed copper, scorch marks or melted plastic at the plug, and bent, corroded, or loose prongs. If the machine flickers or shuts off when the cord is moved, the conductors inside are broken and the cord should be replaced. A heated extractor pulls significant current, so a damaged cord is a fire and shock risk — never run one taped or spliced.

Fitting a genuine X2019 restores a safe, full-length power lead. Twin City Vacuum has been selling and servicing Powr-Flite equipment since 1956. Browse the full Powr-Flite Pulsar Gamma parts and accessories, or read more at the Powr-Flite manufacturer site.

Frequently Asked Questions

What does the Powr-Flite power cord (part# X2019) do on a carpet extractor?

The X2019 is the 25-foot 3-prong power cord that supplies line power to the machine’s motor, pump, and heater. It is the single most flexed and abused electrical part on any portable extractor, so a cut, cracked, or bent-prong cord is both a downtime risk and a safety hazard.

How do I know if my X2019 power cord needs replacing?

Replace the cord if you see cracked or split insulation, exposed conductors, scorching or melting at the plug, bent or loose prongs, or if the machine cuts out when the cord is flexed. Any nicked or taped cord on a machine that draws heater and pump load should be replaced rather than repaired.

What models is the Powr-Flite power cord (part# X2019) compatible with?

The X2019 25 ft power cord is a shared Powr-Flite extractor part that fits the Pulsar Gamma PE200-G10-U and PE200-G15-U, the PE310-G10-U and PE310-G15-U, the PE060-G15-U, and the TE-series extractors TE200-G15-U, TE310-G15-U, TE060-G15-U, and TE251-G15-U.

How do I order the Powr-Flite power cord (part# X2019) or get help?

You can add the Powr-Flite power cord (part# X2019) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.