Powr-Flite Multiwash 14 Soft Brush PFMWSF

The Powr-Flite Multiwash 14 Soft Brush (part# PFMWSF) is the genuine soft-bristle replacement cylindrical brush for the Powr-Flite Multiwash PFMW14 floor scrubber. Supplied as a matched pair, the two counter-rotating brushes let the Multiwash wash and dry in a single pass while treating delicate surfaces gently.

Compatible Models for this Brush

• Powr-Flite Multiwash — PFMW14 (14″)

The softer nylon filament is the right choice when the standard brush is too aggressive. Use the PFMWSF on polished marble and granite, terrazzo, coated and freshly finished floors, sport surfaces such as wrestling mats and gym floors, and low-pile commercial carpet where you want agitation without scratching or dulling the finish. It cleans and refreshes without leaving swirl marks on high-gloss surfaces.

Replace the soft brush when the bristles are matted, splayed, or shorter than new, or when the machine stops lifting soil evenly. Because the Multiwash runs two brushes that rotate toward each other, always change them as a pair so they wear at the same rate and the machine tracks straight. No tools are needed — the brushes unclip from the drum and the replacements snap into the same orientation.

Twin City Vacuum has sold and serviced Powr-Flite floor equipment since 1956. If you are not sure which Multiwash brush suits your surface, call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428 and our team will help you choose.

Frequently Asked Questions

What does the Soft Brush (part# PFMWSF) do on the Powr-Flite Multiwash PFMW14?

The Soft Brush (part# PFMWSF) is the gentle cylindrical brush for the Multiwash PFMW14. Its soft nylon bristles agitate and clean delicate or polished surfaces — marble, terrazzo, finished floors, sport mats, and low-pile carpet — without scratching or dulling the finish, while the machine simultaneously vacuum-dries the floor.

When should I use the PFMWSF instead of the standard or hard brush?

Choose the Soft Brush whenever the standard brush feels too aggressive: high-gloss stone, coated or freshly sealed floors, wrestling mats and gym surfaces, and commercial carpet. Use the Standard Brush (PFMWSD) for everyday hard floors and the Hard Brush (PFMWHBD) for soiled unfinished concrete and rough textures.

Is the PFMWSF sold as a pair?

Yes. The Multiwash PFMW14 uses two counter-rotating brushes and the PFMWSF is supplied as a matched pair. Always replace both together so the machine stays balanced and tracks straight; a new brush paired with a worn one scrubs unevenly.

How do I order the Soft Brush (part# PFMWSF) or get help?

You can add the Soft Brush (part# PFMWSF) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can confirm the right brush for your surface.