Powr-Flite Pro-Lite BP4S Backpack Vacuum Paper Bags 10-Pack X1486

The Powr-Flite Pro-Lite Backpack Vacuum Paper Bag (part# X1486) is a genuine Tacony OEM replacement filter bag for the Powr-Flite Pro-Lite BP4S four-quart backpack vacuum, supplied here in a convenient 10-pack. Each multi-ply paper bag traps fine dust, grit, and debris as air passes through the vacuum, protecting the motor from abrasive particles while keeping exhaust air clean. Running a fresh X1486 bag is the single most important thing you can do to keep your BP4S pulling strong, consistent suction.

Compatible Models for the Pro-Lite Backpack Paper Bag X1486

• Powr-Flite Pro-Lite Backpack Vacuum — BP4S

The X1486 is sized specifically for the 4-quart Pro-Lite BP4S dust chamber and is not interchangeable with the larger Comfort Pro backpack bags. When you buy the correct bag for your machine, it seats squarely on the inlet collar so unfiltered air cannot bypass the media — a common cause of premature motor wear on backpack vacuums run on generic or ill-fitting bags.

Replace the paper bag when it is about two-thirds full, when suction noticeably drops, or when you can smell dust in the exhaust. A bag packed to capacity restricts airflow, forces the motor to work harder and run hotter, and lets fine particles blow back into the room. For crews vacuuming daily, keeping a 10-pack of X1486 bags on the shelf means an operator can swap a full bag in seconds and keep moving instead of emptying and reusing a clogged one. Never wash or reuse a paper vacuum bag — the media loses its filtration once wet or torn.

Twin City Vacuum has been selling and servicing Powr-Flite equipment since 1956. If you are not sure whether the X1486 is the right bag for your backpack vacuum, our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the correct part — just call 763-535-0770 before you order.

Frequently Asked Questions

What does the Pro-Lite Backpack Paper Bag (part# X1486) do on the Powr-Flite BP4S?

The X1486 paper bag is the primary filter and dust collector in the Powr-Flite Pro-Lite BP4S backpack vacuum. It captures the dirt and fine dust the vacuum picks up while shielding the motor from abrasive debris, so the machine keeps strong suction and vents clean exhaust air. It comes in a 10-pack.

How do I know if my X1486 paper bag needs replacing?

Replace the X1486 bag when it is roughly two-thirds full, when suction on the BP4S drops off, or when dust odor appears in the exhaust. A full or overpacked paper bag restricts airflow, makes the motor run hot, and lets fine dust escape back into the air. Paper bags are single-use — never empty and reuse them.

What models is the Pro-Lite Backpack Paper Bag (part# X1486) compatible with?

The X1486 paper bag is designed specifically for the Powr-Flite Pro-Lite BP4S 4-quart backpack vacuum. It is sized for that machine’s dust chamber and should not be substituted with bags made for the larger Comfort Pro backpack models.

How do I order the Pro-Lite Backpack Paper Bag (part# X1486) or get help?

You can add the Pro-Lite Backpack Paper Bag (part# X1486) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.