Powr-Flite Pulsar Pulse Hose Assembly X2270

The Powr-Flite Pulse Hose Assembly (part# X2270) is a genuine Tacony OEM replacement part that forms the high-pressure solution line inside Powr-Flite Pulsar carpet extractors. It routes pressurized cleaning solution from the demand pump to the machine’s solution outlet, and appears on the Pulsar plumbing diagram as the pulse hose. Without a sound pulse hose, the pump cannot deliver full pressure to the wand.

Because this hose sees the machine’s full 220 PSI every time the pump cycles, its crimped fittings and hose wall are a genuine wear point. Replacing it restores crisp, even spray and eliminates the hidden internal leaks that soak a machine’s interior and waste chemical.

Compatible Models for the Powr-Flite Pulse Hose Assembly (X2270)

• Powr-Flite Pulsar Gamma 10-Gallon Carpet Extractor — PE200-G10-U
• Powr-Flite Pulsar Gamma 15-Gallon Carpet Extractor — PE200-G15-U
• Powr-Flite Pulsar Carpet Extractor — PE310-G10-U
• Powr-Flite Pulsar Carpet Extractor — PE310-G15-U

Signs your X2270 Pulse Hose Assembly needs replacing

The clearest symptom is solution leaking or misting inside the machine housing while the pump runs — a wet interior after a job is a red flag. You may also notice spray pressure at the wand dropping off, uneven fan patterns, or visible cracking, bulging, or weeping at the hose crimps. Since the pulse hose carries the pump’s full output, any weakness here directly robs cleaning pressure at the floor.

Fitting a fresh X2270 is the reliable way to bring a tired Pulsar back to full pressure. Twin City Vacuum has been selling and servicing Powr-Flite equipment since 1956, and we stock the matching pump (part# AQ200) and hoses to rebuild the solution circuit completely. See the full Powr-Flite Pulsar Gamma parts and accessories, or read more at the Powr-Flite manufacturer site.

Frequently Asked Questions

What does the Powr-Flite Pulse Hose Assembly (part# X2270) do on a Pulsar carpet extractor?

The X2270 Pulse Hose Assembly is the high-pressure solution line inside a Powr-Flite Pulsar extractor. It carries pressurized cleaning solution from the pump out to the machine’s solution quick-connect, so it is the plumbing link that lets the pump actually deliver 220 PSI to your wand. It appears on the Pulsar plumbing diagram.

How do I know if my X2270 Pulse Hose Assembly needs replacing?

Replace the pulse hose if you see solution leaking or misting from inside the machine housing, if spray pressure at the wand has dropped even though the pump runs, or if the hose or its fittings show cracking, bulging, or weeping at the crimps. Because it runs at full pump pressure, a failing pulse hose usually shows up as a wet interior or weak, uneven spray.

What models is the Powr-Flite Pulse Hose Assembly (part# X2270) compatible with?

The X2270 Pulse Hose Assembly fits the Powr-Flite Pulsar family of carpet extractors: PE200-G10-U, PE200-G15-U, PE310-G10-U, and PE310-G15-U. It is the plumbing-diagram pulse hose for these machines.

How do I order the Powr-Flite Pulse Hose Assembly (part# X2270) or get help?

You can add the Powr-Flite Pulse Hose Assembly (part# X2270) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.