Powr-Flite Squeegee Assembly PS4A10-09261

The Powr-Flite squeegee assembly (part# PS4A10-09261) is the complete rear squeegee unit for the Powr-Flite PS460 and PS530 walk-behind auto scrubbers. Mounted behind the brush deck, it wipes up the dirty cleaning solution the brush leaves on the floor and funnels it to the vacuum recovery, which is what lets an auto scrubber leave a clean, dry, walk-behind path in one pass instead of the wet floor a mop leaves.

The squeegee is a wear point on any auto scrubber: the blades take the abrasion of every pass and eventually harden, nick, or round over, at which point the machine starts leaving water trails and the floor no longer dries behind it. Replacing the full PS4A10-09261 assembly restores clean recovery and a dry finish. Keeping one on hand means a worn squeegee never turns the scrubber into a machine that just spreads water around.

Compatible Models for the Powr-Flite Squeegee Assembly

The PS4A10-09261 squeegee assembly is a shared unit that fits both Powr-Flite walk-behind scrubbers:

• Powr-Flite PS460 20 inch Brush-Assist Walk-Behind Scrubber
• Powr-Flite PS530 20 inch Self-Propelled Walk-Behind Scrubber

Keeping Your Scrubber Recovering Clean

A worn squeegee is the most common reason an auto scrubber stops leaving floors dry. Pair a fresh PS4A10-09261 squeegee assembly with a good scrub brush — standard, medium, or soft — and the PS460 or PS530 will scrub and recover in a single pass the way it did new.

Twin City Vacuum has been selling and servicing Powr-Flite commercial floor equipment since 1956. Questions about squeegee fit or blades? Call 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428. Manufacturer page: Powr-Flite PS530 Walk-Behind Scrubber.

Frequently Asked Questions

What does the Powr-Flite squeegee assembly do on a PS460 or PS530 scrubber?

The Powr-Flite squeegee assembly (PS4A10-09261) is the rear squeegee unit for the Powr-Flite PS460 and PS530 walk-behind auto scrubbers. It rides behind the brush deck, channels the dirty solution the brush leaves on the floor, and lets the vacuum recover it — leaving the floor dry and streak-free in a single pass.

How do I know if my PS4A10-09261 squeegee assembly needs replacing?

Replace or rebuild the Powr-Flite squeegee assembly when the machine starts leaving water trails or streaks behind it, when the squeegee blades are nicked, hardened, or worn round, or when the assembly is cracked or no longer seats flat against the floor. Poor recovery and a wet floor behind the machine are the classic signs.

Which machines is the Powr-Flite squeegee assembly (part# PS4A10-09261) compatible with?

The PS4A10-09261 squeegee assembly fits the Powr-Flite PS460 20-inch brush-assist walk-behind scrubber and the Powr-Flite PS530 20-inch self-propelled walk-behind scrubber. It is the complete rear squeegee unit for both machines.

How do I order the Powr-Flite squeegee assembly (part# PS4A10-09261) or get help?

You can add the Powr-Flite squeegee assembly (part# PS4A10-09261) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right squeegee for your scrubber.