Reducer Nipple 62360020

$6.99

Genuine OEM reducer nipple (part# 62360020) for Tornado floor scrubbers. It joins two different line sizes in the solution plumbing.

Genuine OEM reducer nipple (part# 62360020) for Tornado floor scrubbers — the machine list is below. In the water filter assembly it is the fitting that steps the solution line from one size to another so components with different port sizes can be joined.

Reducers get treated as filler pieces and they are not. The step in bore is a deliberate restriction, and changing it changes the flow the machine delivers. Fit something with a smaller through-bore and the machine lays down less solution than it should at every control setting, which is a frustrating fault to trace because nothing is actually broken. Fit a larger one and the balance of the circuit shifts the other way.

Failures are the familiar ones for a threaded fitting in a wet, chemical environment. Hairline cracks start at the thread root, usually from over-tightening or from the leverage of a hose being pulled off while the fitting is held; they often only show as a weep under flow, which is enough to draw air into a solution line and make flow inconsistent. Threads strip when a fitting has been in and out several times, and sealing tape or compound left on old threads can mask a joint that is not actually tight.

Inspect it whenever this part of the plumbing is opened. Clean old thread sealant off completely, look for cracks at the thread root and at the shoulder, and replace a fitting that has been over-tightened rather than hoping it will seal one more time.

Compatible Models

  • Tornado TS350-W20-U — 99694
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U

This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the reducer nipple (part# 62360020) do?

It steps the solution line from one size to another so components with different port sizes can be joined in the water filter assembly.

Can I substitute any reducer of the same thread?

Not safely. The step in bore is a deliberate restriction, so a smaller through-bore makes the machine lay down less solution at every control setting — a frustrating fault to trace, because nothing is actually broken.

How do I know it has failed?

Look for hairline cracks at the thread root and at the shoulder; they often only weep under flow, which is enough to draw air into the line and make solution flow inconsistent. Strip old sealant off fully before judging whether a joint is tight.

How do I order the Reducer Nipple (part# 62360020) or get help?

You can add the Reducer Nipple (part# 62360020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the reducer nipple (part# 62360020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Reducer Nipple 62360020”

Your email address will not be published. Required fields are marked *