Saddle Support 63714001

$1.99

Genuine OEM saddle support (part# 63714001) for Tornado floor scrubbers. It is the clamp-style bracket that holds the suction hose to the machine so the hose keeps its routing instead of sagging, chafing or kinking.

Genuine OEM saddle support (part# 63714001), used across a wide range of Tornado floor scrubbers — the full machine list is below. On the suction assembly it is the saddle-shaped clamp that secures the suction hose along its run from the squeegee up to the recovery tank, holding the hose to the frame at the points where the routing was designed.

Hose routing on a scrubber is not decoration. The suction hose has to follow the squeegee through its full range of travel, lift and break-away, and it has to do that without kinking, without rubbing on a moving part, and without drooping into the path of a wheel or a pallet. The saddle supports are what enforce that. Lose one and the hose starts to move where it was never meant to.

The failure sequence is predictable and worth catching early. A support cracks or its fastener works loose, the hose sags at that point, and the sag either traps a pocket of water (which reduces suction and smells after a weekend) or lets the hose rub against something until it wears through. A worn-through suction hose is an air leak that no amount of new squeegee blades will fix, and the hose costs far more than the support that was supposed to protect it.

Inspect the supports whenever the squeegee or suction hose is serviced. Replace any that are cracked, distorted, no longer grip the hose firmly, or have been brittle enough that the fastener has pulled through. Check the hose at every support point too: a bright polished patch or a flat on the hose means it has been moving against something and the routing needs attention as well as a new support.

This is the genuine Tornado part, sized to the hose diameter and the mounting point, so the hose is held at the correct position without being pinched.

Compatible Models

  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 27 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the suction drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the saddle support (part# 63714001) do on a Tornado floor scrubber?

It clamps the suction hose to the machine along its run from the squeegee to the recovery tank, holding the hose to its designed routing so it cannot sag, kink or rub against moving parts.

How do I know if the saddle support (part# 63714001) needs replacing?

Replace it if it is cracked or distorted, no longer grips the hose firmly, or has gone brittle enough for the fastener to pull through. A sagging section of suction hose is usually the first visible sign that a support has failed.

Why does a missing hose support matter?

Because the hose then moves where it was never meant to. It either traps water in a sag — which costs suction and smells after a weekend — or rubs through against something, and a worn-through suction hose is an air leak that new squeegee blades will not fix.

How do I order the Saddle Support (part# 63714001) or get help?

You can add the Saddle Support (part# 63714001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the saddle support (part# 63714001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Saddle Support 63714001”

Your email address will not be published. Required fields are marked *