Screw #10-24 x 5/8 in 01993

The Screw #10-24 x 5/8 in (part# 01993) is a genuine Tacony OEM machine screw used on the Tornado CK 3030 wide-area vacuum (Model 93030) in Series D, E and F.

This is a structural fastener in the body of the machine. A wide-area vacuum runs two motors and a rotating brush, so every panel, bracket and mount on the chassis is under constant low-amplitude vibration whenever the machine is switched on. The fasteners are what keep that assembly rigid; a cover that has lost a screw starts to buzz, then fret at the mounting hole, and the moulding is usually the thing that fails rather than the screw.

Length and thread matter. At 5/8 in this screw is picking up a specific depth of thread — substituting a shorter fastener leaves too few threads engaged to hold, and a longer one can bottom out against whatever sits behind the panel before the head is home, which feels tight but is not. If you are reassembling after a strip-down, replace missing fasteners with the correct Tacony number rather than making up the count from a mixed box.

Series G, H and J use a different number: those machines take the thread-forming part# 33451, listed separately.

Compatible Models for the Screw #10-24 x 5/8 in

• Tornado 93030 30″ Clean-Air Carpetkeeper (Wide Area) — Series D, E and F
• Tornado 93031 30″ Clean-Air Carpetkeeper (Wide Area) 230V

This is a common Tacony fastener used on many machines beyond the models listed. Fits many Tacony models — call 763-535-0770 to confirm fitment for your machine.

These machines are built on the same wide-area platform under different brands and share the great majority of their parts.

Many Tacony fasteners and components are shared more widely across the Tornado, CleanMax, Riccar, Simplicity and Powr-Flite ranges; if your machine is not listed, call us at 763-535-0770 and we will confirm before you order.

Twin City Vacuum has been selling and servicing Tacony equipment since 1956. Browse the full Tornado 93030 main assembly parts, or read more on the Tornado manufacturer site.

Pricing: 01993 is not currently carried in the online dealer catalogue, so this page is listed for identification. Call 763-535-0770 for a quote.

Frequently Asked Questions

What does the Screw #10-24 x 5/8 in do on the Tornado 93030?

On Series D, E and F it is the #10-24 x 5/8 in screw fastening housing and motor-area components. It is the earlier-series equivalent of the screw Tacony later listed as 33451.

Is 01993 the same as 33451?

They occupy the same position but Tacony lists them as separate numbers for separate series. 01993 is specified for Series D, E and F; 33451 is specified for Series G, H and J. Order by the series letter on your machine’s data label rather than substituting one for the other.

How do I know if my Screw #10-24 x 5/8 in (01993) needs replacing?

Replace any screw whose drive recess has rounded out under a worn bit, whose thread is stripped or galled, or which will no longer draw its panel or bracket down tight. If a screw spins without tightening, check the thread it runs into as well — on these machines the female thread in the moulding usually fails before the screw does.

How do I order the Screw #10-24 x 5/8 in (part# 01993) or get help?

Tacony does not currently list 01993 in the online dealer catalogue, so no price is shown here. Call us at 763-535-0770 and we will source it and quote you. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.