Screw M5 x 16 60130502
$1.99
Genuine OEM M5 x 16 mm screw (part# 60130502) for Tornado floor scrubbers. It is the short M5 used where a light bracket or component bolts flat to the tank assembly.
Genuine OEM M5 x 16 mm screw (part# 60130502) for Tornado floor scrubbers — compatible machines are listed below. On the solution tank assembly it fastens a light bracket or component where the joint is straightforward and nothing is stacked behind it.
M5 is the size the machine uses where a joint needs genuine clamping force but is not carrying structural load. On a tank assembly that typically means hardware mounted to or around the moulding: brackets, retainers, guides. Those joints matter for position rather than strength, which changes what goes wrong — a fastener that has backed off here does not drop anything on the floor, it just lets a part sit slightly out of place, and whatever depended on that position stops working properly.
Length is worth checking rather than assuming. At 16 mm this is a short M5; something longer in the same hole can bottom out in a blind boss, leaving the joint loose while the wrench feels tight, or press into the tank wall behind the mounting — which on a plastic moulding is how a slow leak starts years later.
Replace it when the drive recess or hex is rounded, the thread is galled or damaged, or the shank is bent. If it will not hold, check the thread it goes into first: in a plastic boss the host thread usually fails before the screw does, and a stripped boss needs its own attention rather than a tighter screw.
This is the genuine Tornado part in the correct length and diameter.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 7 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the screw (part# 60130502) used?
On the solution tank assembly, fastening a light bracket or component where the joint is straightforward and nothing is stacked behind it.
Can I fit a longer M5 instead?
Check the number. A longer screw can bottom out in a blind boss — leaving the joint loose while the wrench feels tight — or press into the tank wall behind the mounting, which on a plastic moulding is how a slow leak starts years later.
It will not hold any more. What should I check?
The thread it goes into. In a plastic boss the host thread usually fails before the screw does, and a stripped boss needs its own attention rather than a tighter screw.
How do I order the Screw M5 x 16 (part# 60130502) or get help?
You can add the Screw M5 x 16 (part# 60130502) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m5 x 16 (part# 60130502) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet