Screw M8 x 12 60130806
$1.99
Genuine OEM M8 x 12 mm screw (part# 60130806) for Tornado floor scrubbers. It is the shortest M8 fastener in the steering group, used where a fastener threads into a boss with very little depth behind it.
Genuine OEM M8 x 12 mm screw (part# 60130806) for Tornado floor scrubbers — see the machine list below. On the steering wheel assembly it is the shortest of the M8 screws, specified for a position where there is very little depth available behind the threaded hole.
That is the detail that makes length a safety matter rather than a convenience. Where the boss is shallow or there is a component directly behind it, a longer M8 either bottoms out — giving a joint that feels tight on the wrench while the parts are still loose — or passes through and fouls whatever is on the other side. Both failures are invisible from outside and both end with a joint that does not hold.
Because it engages relatively few threads, this screw depends on being properly torqued and on everything around it being in good order. Check it at service with a wrench. If it moves, look at the washer and lock washer beneath it and at the thread in the boss before simply retightening: with limited engagement there is not much margin to lose.
Replace it if the drive recess or hex is rounded, if the thread is damaged or galled anywhere along its short length, or if the head shows signs of having been overtightened to compensate for a joint that was really loose for another reason. A fastener this short should never be relied on to hold through a damaged thread.
This is the genuine Tornado part in the correct length and diameter, so the screw engages the thread it was designed for without bottoming.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the screw (part# 60130806) used on a Tornado floor scrubber?
On the steering wheel assembly, at a position where the threaded hole has very little depth behind it — which is why it is the shortest of the M8 screws in that group.
What happens if I fit a longer M8 screw instead?
It either bottoms out, giving a joint that feels tight on the wrench while the parts are still loose, or it passes through and fouls whatever sits behind. Both are invisible from outside and both end with a joint that does not hold.
How do I know if the screw (part# 60130806) needs replacing?
Replace it if the drive recess or hex is rounded, if the thread is damaged or galled anywhere along its short length, or if the head shows signs of being overtightened. With few threads engaged there is little margin to lose.
How do I order the Screw M8 x 12 (part# 60130806) or get help?
You can add the Screw M8 x 12 (part# 60130806) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m8 x 12 (part# 60130806) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet