
Screw, Pan Head Phillips, 6-32 x 3/8 in., Machine, Zinc 01734
$2.99
Genuine OEM 6-32 x 3/8 in. zinc-plated pan head Phillips machine screw — the small assembly screw used at the control panel and switch mount. A shared commercial fastener used across a wide range of Tornado and Powr-Flite machines.
This is a machine screw, not a self-tapping screw, and that distinction is the reason to buy the right one. A 6-32 machine thread mates with a formed thread or a nut on the other side; dropping a self-tapper into the same hole cuts a fresh thread, destroys the original, and leaves a joint that will not hold the second time it is disturbed. On a part like a control panel that gets opened for every electrical diagnosis, that matters.
Compatible Models
This is a shared commercial fastener used across the Tornado and Powr-Flite ranges. It is used across a wide range of Tornado and Powr-Flite machines, including the models below.
- Tornado: 98774 Windshear 3200, 98786 Windshear 3200
- Powr-Flite: PDS1 Powr-Dryer
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
The pan head is also specified rather than incidental. Its broad, low profile bears on thin moulded or sheet material without digging in the way a countersunk head would, and it sits low enough not to foul the knob or the panel face. The 3/8 in. length gives full thread engagement without the tip protruding into the wiring space behind the panel — a longer screw grabbed from the bin can and does chafe a lead.
Keep spares. These are the screws that get dropped into a blower housing, stripped by an impact driver or left out entirely during a rushed reassembly, and a control panel held by one screw instead of two lets the switch move and fatigue its wiring. Zinc plating gives basic corrosion resistance, which is worth having on machinery that works in damp conditions. This is a shared fastener used right across the commercial range, so its compatibility list is far longer than one machine family.
Frequently Asked Questions
What does this screw do on a commercial carpet dryer?
The 6-32 x 3/8 in. pan head Phillips machine screw (part# 01734) is the small assembly screw used at the control panel and switch mount. Its pan head bears on thin moulded material without digging in, and the 3/8 in. length gives full thread engagement without the tip protruding into the wiring space behind the panel.
How do I know if my assembly screws need replacing?
Replace them if the heads are chewed out, if the threads are stripped or cross-threaded, or if any are missing. Use the specified 6-32 machine screw rather than a self-tapping screw — a self-tapper cuts a new thread and destroys the original, leaving a joint that will not hold next time it is opened.
What models is the screw, Pan Head Phillips, 6-32 x 3/8 in., Machine, Zinc (part# 01734) compatible with?
It fits Tornado 98774 Windshear 3200, 98786 Windshear 3200; Powr-Flite PDS1 Powr-Dryer, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the screw, Pan Head Phillips, 6-32 x 3/8 in., Machine, Zinc (part# 01734) or get help?
You can add the Screw, Pan Head Phillips, 6-32 x 3/8 in., Machine, Zinc (part# 01734) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.




Reviews
There are no reviews yet