Solenoid Valve Body 47512020
$89.99
Genuine OEM solenoid valve body (part# 47512020) for Tornado floor scrubbers. It is the hydraulic half of the solution solenoid valve, without the coil.
Genuine OEM solenoid valve body (part# 47512020) for Tornado floor scrubbers — the machines it fits are listed below. It is the hydraulic half of the solution solenoid valve: the ported body containing the seat, plunger and spring, supplied without the coil.
Buying the body on its own makes sense when the coil tests good. Coils fail electrically and bodies fail mechanically, and the two are independent — a machine with a healthy coil that clicks properly but passes no water, or one that will not shut off, has a body problem, and replacing the whole assembly spends money on a coil that is fine.
Bodies fail from what goes through them. Grit that got past the filter screen scores the seat, so the valve no longer closes fully and the machine drips solution when it should be off — wasteful, and a slip hazard around a parked machine. Scale from hard water builds up and stiffens the plunger so the valve responds slowly or sticks. Detergent left in the line over a weekend dries on the seat and in the plunger bore. And debris can simply hold the plunger off its seat.
Diagnosis is straightforward with the coil as the test tool: if the coil clicks when energised but nothing changes hydraulically, the body is the problem.
Before fitting a new body, deal with the cause. A blocked, torn or bypassed filter screen is what put grit on the old seat, and it will do the same to the new one. Flushing the system with clean water at the end of a shift is what keeps the valve alive.
Compatible Models
- Tornado 20″ BD 20/11 — 99680
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the solenoid valve body (part# 47512020) do?
It is the hydraulic half of the solution solenoid valve — the ported body containing the seat, plunger and spring. It is supplied without the coil.
When should I replace the body rather than the whole valve?
When the coil tests good. Coils fail electrically and bodies fail mechanically, independently of each other. If the coil clicks when energised but nothing changes hydraulically, the body is the problem and a whole-assembly replacement wastes a good coil.
What makes a valve body fail?
What goes through it: grit past the filter scores the seat so the valve will not close, scale from hard water stiffens the plunger, and detergent left in the line over a weekend dries on the seat. Fix the filter before fitting a new body, or the new seat goes the same way.
How do I order the Solenoid Valve Body (part# 47512020) or get help?
You can add the Solenoid Valve Body (part# 47512020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solenoid valve body (part# 47512020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet